Технически документи
Спецификации
Brand
TE ConnectivitySub Type
End Cap
Product Type
Heat Shrink Boot
Material
Polyolefin
Number of Breakouts
1
Shrink Temperature
125°C
Colour
Black
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
110°C
Maximum Inside Diameter
6.35mm
Maximum Shrunk Diameter
2.03mm
Minimum Inside Diameter
4mm
Standards/Approvals
UL E85381
Series
PD Caps
Adhesive Backing
No
Страна на произход
Czech Republic
Детайли за продукта
Semirigid, encapsulant-lined heat shrink end caps with a shrink ratio of 3:1. When the dual wall PD Caps are briefly heated, the outer jacket shrinks while the inner wall flows into voids in the crimp, creating an encapsulated and electrically insulated connection.
PD Caps are not intended for use where immersion in fluids is required.
Информацията за складовите наличности временно не е налична.
€ 35,27
€ 0,176 Each (In a Pack of 200) (ex VAT)
200
€ 35,27
€ 0,176 Each (In a Pack of 200) (ex VAT)
Информацията за складовите наличности временно не е налична.
200
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 200 - 2800 | € 0,176 | € 35,27 |
| 3000 - 9800 | € 0,17 | € 34,07 |
| 10000+ | € 0,166 | € 33,11 |
Технически документи
Спецификации
Brand
TE ConnectivitySub Type
End Cap
Product Type
Heat Shrink Boot
Material
Polyolefin
Number of Breakouts
1
Shrink Temperature
125°C
Colour
Black
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
110°C
Maximum Inside Diameter
6.35mm
Maximum Shrunk Diameter
2.03mm
Minimum Inside Diameter
4mm
Standards/Approvals
UL E85381
Series
PD Caps
Adhesive Backing
No
Страна на произход
Czech Republic
Детайли за продукта
Semirigid, encapsulant-lined heat shrink end caps with a shrink ratio of 3:1. When the dual wall PD Caps are briefly heated, the outer jacket shrinks while the inner wall flows into voids in the crimp, creating an encapsulated and electrically insulated connection.
PD Caps are not intended for use where immersion in fluids is required.
