TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 3.2 mm Cable Diameter 1.6 mm Cable Diameter
Технически документи
Спецификации
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
16mm
Material
Polyolefin
Dielectric Strength
2kV
Minimum Cable Diameter
1.6mm
Maximum Cable Diameter
3.2mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
CE, EU
Shrink Temperature
85°C
Series
CWT
Страна на произход
Mexico
Детайли за продукта
CWT15 wire terminals
These terminals allow connection of wires to component pins, posts, tabs or terminals.
Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.
The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a fluxed solder ring and a heatshrink sleeve.
Quick and easy-to-use: simply place the terminal and the wire together and heat them using a hot air gun.
The clear sleeve facilitates connection quality control.
Информацията за складовите наличности временно не е налична.
€ 18,17
€ 1,817 Each (In a Pack of 10) (ex VAT)
10
€ 18,17
€ 1,817 Each (In a Pack of 10) (ex VAT)
Информацията за складовите наличности временно не е налична.
10
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 10 - 140 | € 1,817 | € 18,17 |
| 150 - 490 | € 1,733 | € 17,34 |
| 500+ | € 1,646 | € 16,46 |
Технически документи
Спецификации
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
16mm
Material
Polyolefin
Dielectric Strength
2kV
Minimum Cable Diameter
1.6mm
Maximum Cable Diameter
3.2mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
CE, EU
Shrink Temperature
85°C
Series
CWT
Страна на произход
Mexico
Детайли за продукта
CWT15 wire terminals
These terminals allow connection of wires to component pins, posts, tabs or terminals.
Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.
The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a fluxed solder ring and a heatshrink sleeve.
Quick and easy-to-use: simply place the terminal and the wire together and heat them using a hot air gun.
The clear sleeve facilitates connection quality control.