Технически документи
Спецификации
Brand
STMicroelectronicsLogic Family
CMOS
Product Type
Line Transceiver
Logic Function
Buffer & Line Driver
Number of Channels
2
Input Type
CMOS
Output Type
3 State
Polarity
Inverting
Minimum Supply Voltage
5V
Pin Count
20
Maximum Supply Voltage
35V
Maximum Propagation Delay Time @ CL
10μs
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Height
0.47mm
Length
2.57mm
Standards/Approvals
No
Width
2.57mm
Series
L6364
Supply Current
50mA
Automotive Standard
No
Детайли за продукта
The STMicroelectronics dual channel transceiver for industrial sensor applications has been designed to support even the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signalling cable. In normal operation the L6364 is configured at start up by the microcontroller via the SPI interface. Typically, the L6364 then operates as a Single Input Output device driving the output lines as configured by the microcontroller. If the device is connected to an IO-Link Master, then the Master can initiate communication and exchange data with the microcontroller while the L6364 acts as a physical layer for the communication.
Информацията за складовите наличности временно не е налична.
Запитване за цена
Each (On a Reel of 5000) (ex VAT)
5000
Запитване за цена
Each (On a Reel of 5000) (ex VAT)
Информацията за складовите наличности временно не е налична.
5000
Технически документи
Спецификации
Brand
STMicroelectronicsLogic Family
CMOS
Product Type
Line Transceiver
Logic Function
Buffer & Line Driver
Number of Channels
2
Input Type
CMOS
Output Type
3 State
Polarity
Inverting
Minimum Supply Voltage
5V
Pin Count
20
Maximum Supply Voltage
35V
Maximum Propagation Delay Time @ CL
10μs
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Height
0.47mm
Length
2.57mm
Standards/Approvals
No
Width
2.57mm
Series
L6364
Supply Current
50mA
Automotive Standard
No
Детайли за продукта
The STMicroelectronics dual channel transceiver for industrial sensor applications has been designed to support even the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signalling cable. In normal operation the L6364 is configured at start up by the microcontroller via the SPI interface. Typically, the L6364 then operates as a Single Input Output device driving the output lines as configured by the microcontroller. If the device is connected to an IO-Link Master, then the Master can initiate communication and exchange data with the microcontroller while the L6364 acts as a physical layer for the communication.
