RS PRO Barrier Strip, 1 Contact
Технически документи
Спецификации
Brand
RS ProNumber of Contacts
1
Product Type
Barrier Strip
Contact Material
Steel
Contact Plating
Zinc
Fixing Centres
11.2 mm
Screw Size
M4
Wire Size
22/12 AWG
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
110°C
Width
29 mm
Length
38mm
Depth
11mm
Страна на произход
Italy
Детайли за продукта
Single Pole Interlocking Barrier Strip
Zinc-plated and passivated steel inserts All contacts on any one pole are commoned. Nylon body material
Mounts direct to flat surface (including metal base) or to miniature DIN rail (stock no. 467-349)
The tab/tab type has three 6.3 mm ( in.) tabs on each side. Suitable crimp connectors are available (see stock no. 534-705). The tab/screw type has three 6.3 mm tabs on one side and an M4 screw terminal on the other
An end plate must be used to complete any combination of terminals. This plate has the final 3.5 mm fixing hole
Fixing centres: 11.2 mm terminal to terminal, 11.0 mm terminal to end plate
Информацията за складовите наличности временно не е налична.
Запитване за цена
Each (In a Pack of 10) (ex VAT)
10
Запитване за цена
Each (In a Pack of 10) (ex VAT)
Информацията за складовите наличности временно не е налична.
10
Технически документи
Спецификации
Brand
RS ProNumber of Contacts
1
Product Type
Barrier Strip
Contact Material
Steel
Contact Plating
Zinc
Fixing Centres
11.2 mm
Screw Size
M4
Wire Size
22/12 AWG
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
110°C
Width
29 mm
Length
38mm
Depth
11mm
Страна на произход
Italy
Детайли за продукта
Single Pole Interlocking Barrier Strip
Zinc-plated and passivated steel inserts All contacts on any one pole are commoned. Nylon body material
Mounts direct to flat surface (including metal base) or to miniature DIN rail (stock no. 467-349)
The tab/tab type has three 6.3 mm ( in.) tabs on each side. Suitable crimp connectors are available (see stock no. 534-705). The tab/screw type has three 6.3 mm tabs on one side and an M4 screw terminal on the other
An end plate must be used to complete any combination of terminals. This plate has the final 3.5 mm fixing hole
Fixing centres: 11.2 mm terminal to terminal, 11.0 mm terminal to end plate