PR Electronics Signal Conditioner, Zone, EAC, UL, FM, Zone 2, Hardware Assessment, EU RO marine, IECEx, ATEX, DNV GL
Технически документи
Спецификации
Brand
PR ElectronicsProduct Type
Signal Conditioner
Barrier Type
Galvanic Barrier
Mount Type
DIN Rail
Hazardous Area Certification
Zone, EAC, UL, FM, Zone 2, Hardware Assessment, EU RO marine, IECEx, ATEX, DNV GL
Terminal Type
Screw
IP Rating
IP20
Supply Voltage
21.6 to 253 V ac, 19.2 to 300 V dc
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
60°C
Standards/Approvals
NE 43, SIL 2, DNV-GL / EU-RO marine, FM, Zone 2, SIL 2/3 Full Assessment IEC 61508, SIL 2 Full Assessment IEC 61508, NE 21, Hardware Assessment, ATEX, UL 61010 / 508, EAC, Zone 2-DIV 2, IECEX
Series
5104A
Страна на произход
Denmark
Детайли за продукта
PR Electronics 5104A Repeater/ Power Supply
PR Electronics 5104A repeater is a power supply and signal isolator for 2-wire transmitters. The 5104A signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.
Features and Benefits
• 1:1 or signal conversion of analog current / voltage signals
• 3.75 kV ac galvanic isolation
• Inputs, outputs and supply are floating and galvanically separated
• Output can be connected either as an active current / voltage transmitter or as a 2-wire transmitter
• Low response time
• Universal supply by AC or DC
• Loop supply > 17.1 V
• DIN Rail mounting (vertically or horizontally)
PR Electronics DIN Rail Mounting
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Информацията за складовите наличности временно не е налична.
€ 332,43
€ 332,43 Всеки (ex VAT)
1
€ 332,43
€ 332,43 Всеки (ex VAT)
Информацията за складовите наличности временно не е налична.
1
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Технически документи
Спецификации
Brand
PR ElectronicsProduct Type
Signal Conditioner
Barrier Type
Galvanic Barrier
Mount Type
DIN Rail
Hazardous Area Certification
Zone, EAC, UL, FM, Zone 2, Hardware Assessment, EU RO marine, IECEx, ATEX, DNV GL
Terminal Type
Screw
IP Rating
IP20
Supply Voltage
21.6 to 253 V ac, 19.2 to 300 V dc
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
60°C
Standards/Approvals
NE 43, SIL 2, DNV-GL / EU-RO marine, FM, Zone 2, SIL 2/3 Full Assessment IEC 61508, SIL 2 Full Assessment IEC 61508, NE 21, Hardware Assessment, ATEX, UL 61010 / 508, EAC, Zone 2-DIV 2, IECEX
Series
5104A
Страна на произход
Denmark
Детайли за продукта
PR Electronics 5104A Repeater/ Power Supply
PR Electronics 5104A repeater is a power supply and signal isolator for 2-wire transmitters. The 5104A signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.
Features and Benefits
• 1:1 or signal conversion of analog current / voltage signals
• 3.75 kV ac galvanic isolation
• Inputs, outputs and supply are floating and galvanically separated
• Output can be connected either as an active current / voltage transmitter or as a 2-wire transmitter
• Low response time
• Universal supply by AC or DC
• Loop supply > 17.1 V
• DIN Rail mounting (vertically or horizontally)
PR Electronics DIN Rail Mounting
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products