Технически документи
Спецификации
Brand
MPSProduct Type
Power Control Switch
Power Switch Type
Load Switch
Switch On Resistance RdsOn
43mΩ
Number of Outputs
1
Power Rating
1.89W
Number of Inputs
1
Mount Type
Surface
Minimum Supply Voltage
2.9V
Package Type
TSOT-23-6
Pin Count
6
Maximum Supply Voltage
14V
Maximum Operating Temperature
125°C
Minimum Operating Temperature
-40°C
Length
2.9mm
Standards/Approvals
RoHS
Width
3mm
Series
MP5036
Страна на произход
China
Детайли за продукта
The MPS International Ltd Current Limit Switch with 15V Over Voltage Clamp is a protection device designed to protect circuitry on the output from transients on the input. It also protects the input from undesired shorts and transients coming from the output. During start up, the inrush current is limited by limiting the slew rate at the output. The slew rate is controlled by the DV/DT pin setting.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
Информацията за складовите наличности временно не е налична.
€ 4,97
€ 0,993 Each (Supplied as a Tape) (ex VAT)
Стандарт
5
€ 4,97
€ 0,993 Each (Supplied as a Tape) (ex VAT)
Информацията за складовите наличности временно не е налична.
Стандарт
5
| количество | Единична цена | Per Лента |
|---|---|---|
| 5 - 45 | € 0,993 | € 4,97 |
| 50 - 95 | € 0,943 | € 4,71 |
| 100+ | € 0,873 | € 4,37 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
Технически документи
Спецификации
Brand
MPSProduct Type
Power Control Switch
Power Switch Type
Load Switch
Switch On Resistance RdsOn
43mΩ
Number of Outputs
1
Power Rating
1.89W
Number of Inputs
1
Mount Type
Surface
Minimum Supply Voltage
2.9V
Package Type
TSOT-23-6
Pin Count
6
Maximum Supply Voltage
14V
Maximum Operating Temperature
125°C
Minimum Operating Temperature
-40°C
Length
2.9mm
Standards/Approvals
RoHS
Width
3mm
Series
MP5036
Страна на произход
China
Детайли за продукта
The MPS International Ltd Current Limit Switch with 15V Over Voltage Clamp is a protection device designed to protect circuitry on the output from transients on the input. It also protects the input from undesired shorts and transients coming from the output. During start up, the inrush current is limited by limiting the slew rate at the output. The slew rate is controlled by the DV/DT pin setting.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
