Технически документи
Спецификации
Brand
MolexSeries
MICRO-LATCH
Pitch
2.0mm
Number Of Contacts
3
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Mounting Type
Through Hole
Connector System
Wire to Board
Termination Method
Solder
Contact Material
Brass
Contact Plating
Tin
Current Rating
2.0A
Series Number
53254
Voltage Rating
125.0 V
Страна на произход
Malaysia
Детайли за продукта
Right Angle Headers, 53254 Series
These Molex Micro-Latch 2.0 mm pitch Right Angle 53254 Series Pin Headers with a three-sided shroud mate with 51065 Series Housings typical stock number 688-2603 .
2.0mm Wire to Board Molex Micro-Latch
This system applies a friction lock mechanism where the noses on receptacle housings slide into the header wall openings. This ensures a durable mating and a protection of the electrical circuitry.
€ 1,86
€ 0,186 Each (In a Pack of 10) (ex VAT)
Стандарт
10
€ 1,86
€ 0,186 Each (In a Pack of 10) (ex VAT)
Информацията за складовите наличности временно не е налична.
Стандарт
10
Информацията за складовите наличности временно не е налична.
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 10 - 190 | € 0,186 | € 1,86 |
| 200 - 740 | € 0,135 | € 1,35 |
| 750 - 2990 | € 0,122 | € 1,22 |
| 3000 - 5990 | € 0,108 | € 1,08 |
| 6000+ | € 0,103 | € 1,03 |
Технически документи
Спецификации
Brand
MolexSeries
MICRO-LATCH
Pitch
2.0mm
Number Of Contacts
3
Number Of Rows
1
Body Orientation
Right Angle
Shrouded/Unshrouded
Shrouded
Mounting Type
Through Hole
Connector System
Wire to Board
Termination Method
Solder
Contact Material
Brass
Contact Plating
Tin
Current Rating
2.0A
Series Number
53254
Voltage Rating
125.0 V
Страна на произход
Malaysia
Детайли за продукта
Right Angle Headers, 53254 Series
These Molex Micro-Latch 2.0 mm pitch Right Angle 53254 Series Pin Headers with a three-sided shroud mate with 51065 Series Housings typical stock number 688-2603 .
2.0mm Wire to Board Molex Micro-Latch
This system applies a friction lock mechanism where the noses on receptacle housings slide into the header wall openings. This ensures a durable mating and a protection of the electrical circuitry.


