Megger LT300-EN-BS Loop Impendence Tester, Loop Impedance Test Type 2 Wire 550V CAT IV
Технически документи
Спецификации
Brand
MeggerTest Equipment Type
Earth Loop Impedance Tester
Product Type
Loop Impendence Tester
Loop Impedance Test Type
2 Wire
Maximum Voltage Measurement
550V
Display Type
LCD
Minimum Operating Temperature
-10°C
Loop Test Accuracy
±5 %
Battery Type
AA
Maximum Operating Temperature
60°C
Power Source
Battery
Width
148 mm
Height
78mm
Length
203mm
Weight
980g
Standards/Approvals
IEC 61326-1
Calibrated
UKAS
Plug Type
3-Pin (Global)
Safety Category Level
CAT IV
Safety Category Voltage
300V
Страна на произход
United Kingdom
Детайли за продукта
LT300 Loop Tester
The LT300 combines high current-loop testing over a wide range of frequencies and supply voltages with simple operation. This is a HIGH CURRENT ONLY tester, designed for installations where there are no RCDs installed. A two-wire test performs a fast loop impedance measurement at a test current up to 27A, with a resolution of 0.01ohms. Frequency range and operating voltage are wide, allowing for a diverse range of applications up to and including CATIV 550V phase-to-phase. Testing commences automatically as soon as the instrument is connected to the supply. Repeat testing is provided by the TEST button.
High current loop tester
Simple auto start operation
16Hz to 400Hz frequency range
Up to CATIV 300V phase-to-earth (550V phase-to-phase) applications
Optional two-wire lead set available separately, RS stock no. 537-7282
Supplied with
durable hard carry case; BS1363 mains socket test lead; 8 x AA alkaline batteries; instructions.
Информацията за складовите наличности временно не е налична.
€ 790,56
€ 790,56 Всеки (ex VAT)
Calibration type
UKAS Calibration
1
€ 790,56
€ 790,56 Всеки (ex VAT)
Информацията за складовите наличности временно не е налична.
Calibration type
UKAS Calibration
1
Технически документи
Спецификации
Brand
MeggerTest Equipment Type
Earth Loop Impedance Tester
Product Type
Loop Impendence Tester
Loop Impedance Test Type
2 Wire
Maximum Voltage Measurement
550V
Display Type
LCD
Minimum Operating Temperature
-10°C
Loop Test Accuracy
±5 %
Battery Type
AA
Maximum Operating Temperature
60°C
Power Source
Battery
Width
148 mm
Height
78mm
Length
203mm
Weight
980g
Standards/Approvals
IEC 61326-1
Calibrated
UKAS
Plug Type
3-Pin (Global)
Safety Category Level
CAT IV
Safety Category Voltage
300V
Страна на произход
United Kingdom
Детайли за продукта
LT300 Loop Tester
The LT300 combines high current-loop testing over a wide range of frequencies and supply voltages with simple operation. This is a HIGH CURRENT ONLY tester, designed for installations where there are no RCDs installed. A two-wire test performs a fast loop impedance measurement at a test current up to 27A, with a resolution of 0.01ohms. Frequency range and operating voltage are wide, allowing for a diverse range of applications up to and including CATIV 550V phase-to-phase. Testing commences automatically as soon as the instrument is connected to the supply. Repeat testing is provided by the TEST button.
High current loop tester
Simple auto start operation
16Hz to 400Hz frequency range
Up to CATIV 300V phase-to-earth (550V phase-to-phase) applications
Optional two-wire lead set available separately, RS stock no. 537-7282
Supplied with
durable hard carry case; BS1363 mains socket test lead; 8 x AA alkaline batteries; instructions.