Технически документи
Спецификации
Brand
STMicroelectronicsProduct Type
Power Factor Controller IC
Start-up Supply Current
0.05mA
Sub Type
Power Factor Controller
Maximum Source Current
-5mA
Switching Frequency
70kHz
Maximum Sink Current
4500μA
Supply Current
0.09mA
Zero Power Detection
Yes
Mount Type
Surface
Package Type
SOIC
Pin Count
14
Minimum Supply Voltage
10.3V
Maximum Supply Voltage
22V
Minimum Operating Temperature
-25°C
Standards/Approvals
No
Length
8.75mm
Height
1.65mm
Maximum Operating Temperature
150°C
Automotive Standard
No
Детайли за продукта
Pulse-width modulator (PWM) controllers can support isolated and non-isolated AC-DC and DC-DC switch mode power supplies. They are based on the most popular topologies in both single-ended, such as fly-back, forward or quasi-resonant controllers, and double-ended configurations, such as asymmetrical half-bridge, for Switch Mode Power Supplies (SMPS).
The PMW controllers also integrate a comprehensive set of protections for enhanced robustness and reliability.
Информацията за складовите наличности временно не е налична.
€ 8,17
€ 0,817 Each (In a Pack of 10) (ex VAT)
Стандарт
10
€ 8,17
€ 0,817 Each (In a Pack of 10) (ex VAT)
Информацията за складовите наличности временно не е налична.
Стандарт
10
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 10 - 90 | € 0,817 | € 8,18 |
| 100 - 490 | € 0,797 | € 7,97 |
| 500 - 990 | € 0,776 | € 7,76 |
| 1000+ | € 0,758 | € 7,58 |
Технически документи
Спецификации
Brand
STMicroelectronicsProduct Type
Power Factor Controller IC
Start-up Supply Current
0.05mA
Sub Type
Power Factor Controller
Maximum Source Current
-5mA
Switching Frequency
70kHz
Maximum Sink Current
4500μA
Supply Current
0.09mA
Zero Power Detection
Yes
Mount Type
Surface
Package Type
SOIC
Pin Count
14
Minimum Supply Voltage
10.3V
Maximum Supply Voltage
22V
Minimum Operating Temperature
-25°C
Standards/Approvals
No
Length
8.75mm
Height
1.65mm
Maximum Operating Temperature
150°C
Automotive Standard
No
Детайли за продукта
Pulse-width modulator (PWM) controllers can support isolated and non-isolated AC-DC and DC-DC switch mode power supplies. They are based on the most popular topologies in both single-ended, such as fly-back, forward or quasi-resonant controllers, and double-ended configurations, such as asymmetrical half-bridge, for Switch Mode Power Supplies (SMPS).
The PMW controllers also integrate a comprehensive set of protections for enhanced robustness and reliability.