STMicroelectronics PIR Sensor Expansion Board for Murata IRA-E700ST0 STM32 Nucleo
Технически документи
Спецификации
Brand
STMicroelectronicsSensor Technology
PIR Sensor
Featured Device
Murata IRA-E700ST0
For Use With
STM32 Nucleo
Kit Classification
Expansion Board
Детайли за продукта
STEVAL-IDI009V1 PIR Sensor Signal Conditioning Kit
The STEVAL-IDI009V1 evaluation board conditions the signal generated by an on-board passive infrared (PIR) sensor for applications such as security alarms. A person moving in range of the sensor triggers a detection event, which can in turn be used to trip an alarm or command room lighting to be turned on, for example.
• Provides motion detection with a Murata IRA-E700ST0 PIR sensor
• TSU102 operational amplifier circuits perform signal conditioning
• Band pass filter bandwidth from 0.7 to 5Hz
• 24μA standby-current consumption
• Detection area can be widened with Fresnel lens (not included)
• 3 x Test points
• Arduino UNO v3 Shield headers
• Compatible with ST NUCLEO MCU development boards
• Powered from Shield header
• Suitable for home automation/security applications
Sensor Solution Evaluation Boards, STMicroelectronics
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 40,09
Всеки (ex VAT)
1
€ 40,09
Всеки (ex VAT)
1
Купете в насипно състояние
| количество | Единична цена |
|---|---|
| 1 - 1 | € 40,09 |
| 2 - 4 | € 39,00 |
| 5 - 9 | € 37,97 |
| 10 - 24 | € 37,00 |
| 25+ | € 36,08 |
Технически документи
Спецификации
Brand
STMicroelectronicsSensor Technology
PIR Sensor
Featured Device
Murata IRA-E700ST0
For Use With
STM32 Nucleo
Kit Classification
Expansion Board
Детайли за продукта
STEVAL-IDI009V1 PIR Sensor Signal Conditioning Kit
The STEVAL-IDI009V1 evaluation board conditions the signal generated by an on-board passive infrared (PIR) sensor for applications such as security alarms. A person moving in range of the sensor triggers a detection event, which can in turn be used to trip an alarm or command room lighting to be turned on, for example.
• Provides motion detection with a Murata IRA-E700ST0 PIR sensor
• TSU102 operational amplifier circuits perform signal conditioning
• Band pass filter bandwidth from 0.7 to 5Hz
• 24μA standby-current consumption
• Detection area can be widened with Fresnel lens (not included)
• 3 x Test points
• Arduino UNO v3 Shield headers
• Compatible with ST NUCLEO MCU development boards
• Powered from Shield header
• Suitable for home automation/security applications