Microchip Xplained Pro Zigbit Extension Board Evaluation Kit ATZB-212B-XPRO

ZigBit Sub-1GHz AT86RF212B Extension Board

The Atmel ZigBit™ extension board ATZB-212B-XPRO supports the AT86RF212B wireless transceiver module. It is used to evaluate the module and can operate plugged into an Xplained Pro board or wired into a developer's prototype system. Designed for IEEE 802.15.4-2003/2006, IEEE 802.15.4c-2009 compliant WPAN communication and ZigBee mesh network operation, it also supports the 6LoWPAN protocol.

ZigBit Sub-1GHz AT86RF212B Module
Xplained Pro 20-pin connector
Headers for ZigBit pins not routed to Xplained Pro connector
Header for monitoring ZigBit current
ZigBit reset pushbutton

ZigBit ATZB-RF-212B module
AT86RF212B 700/800/900MHz ISM-Band Transceiver chip
RF Output Power: Up to +10dBm
Receiver sensitivity: -110dBm
Modulation: BPSK, O-QPSK
OTA data rate: Up to 1Mbps
AES-128 encryption
MAC hardware accelerator
Pre-loaded with Atmel assigned 64-bit MAC address
128byte FIFO Tx/Rx buffer
Host communication: serial SPI
Built-in chip antenna
MS-147 RF test connector
Power supply: +1.8 to +3.6Vdc
Dimensions: 25 x 20 x 3.2mm
Applications: Industrial Control, Residential and commercial automation, Health care, Consumer electronics, PC peripherals and local communication for the Internet of Things (IoT)