Microchip MCP25612FD-E/SL, CAN Transceiver 8Mbps CAN 2.0, CAN FD, 14-Pin SOIC
Технически документи
Спецификации
Brand
MicrochipMaximum Data Rate
8Mbps
Number of Transceivers
2
IC Type
CAN Transceiver IC
Standard Supported
CAN 2.0, CAN FD
Power Down Mode
Standby
Maximum Supply Current
70 mA
Mounting Type
Surface Mount
Package Type
SOIC
Pin Count
14
Dimensions
8.65 x 3.9 x 1.25mm
Length
8.65mm
Width
3.9mm
Height
1.25mm
Maximum Operating Supply Voltage
5.5 V
Maximum Operating Temperature
+125 °C
Minimum Operating Supply Voltage
4.5 V
Minimum Operating Temperature
-40 °C
Страна на произход
Thailand
Детайли за продукта
MCP25612FD CAN Transceivers
From Microchip the MCP25612FD is a dual CAN Transceiver that supports both CAN 2.0 (Classic) and CAN FD (Flexible Data-rate) physical layer requirements, allowing designers to build flexibility into their CAN based applications. This IC offers the features of two fully independent MCP2561FD CAN Transceivers (except the SPLIT pin) on one chip, making this device optimal for applications where CAN network redundancy is a critical consideration.
Features
Supports both CAN 2.0 and CAN FD physical layer requirements
Optimized for CAN FD (Flexible Data-Rate) at 2, 5 and 8 Mbps Operation
Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Two Fully Independent VDDX and VSSX Pins per CAN FD Transceiver
Standby Current: 5 μA per transceiver (typical)
CAN Bus Communication - Microchip
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
57
P.O.A.
57
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Технически документи
Спецификации
Brand
MicrochipMaximum Data Rate
8Mbps
Number of Transceivers
2
IC Type
CAN Transceiver IC
Standard Supported
CAN 2.0, CAN FD
Power Down Mode
Standby
Maximum Supply Current
70 mA
Mounting Type
Surface Mount
Package Type
SOIC
Pin Count
14
Dimensions
8.65 x 3.9 x 1.25mm
Length
8.65mm
Width
3.9mm
Height
1.25mm
Maximum Operating Supply Voltage
5.5 V
Maximum Operating Temperature
+125 °C
Minimum Operating Supply Voltage
4.5 V
Minimum Operating Temperature
-40 °C
Страна на произход
Thailand
Детайли за продукта
MCP25612FD CAN Transceivers
From Microchip the MCP25612FD is a dual CAN Transceiver that supports both CAN 2.0 (Classic) and CAN FD (Flexible Data-rate) physical layer requirements, allowing designers to build flexibility into their CAN based applications. This IC offers the features of two fully independent MCP2561FD CAN Transceivers (except the SPLIT pin) on one chip, making this device optimal for applications where CAN network redundancy is a critical consideration.
Features
Supports both CAN 2.0 and CAN FD physical layer requirements
Optimized for CAN FD (Flexible Data-Rate) at 2, 5 and 8 Mbps Operation
Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Two Fully Independent VDDX and VSSX Pins per CAN FD Transceiver
Standby Current: 5 μA per transceiver (typical)
CAN Bus Communication - Microchip
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products