Huco Universal Lateral, 1.1in Outside Diameter, 3/8in Bore, 1in Length Coupler
Технически документи
Спецификации
Brand
HucoCoupling Types
Universal Lateral
Bore
3/8in
Outside Diameter
1.1in
Length
1in
Torque Rating
1.7Nm
Misalignment - Angular
2°
Misalignment - Parallel
0.2mm
Страна на произход
United Kingdom
Детайли за продукта
Uni-Lat® Couplings
Uni-Lat lateral displacement couplers uniquely combine the mechanisms of the universal joint and the Oldham type coupling to compensate for simultaneous parallel and angular shaft offsets. Parallel misalignment is accommodated by lateral displacement, therefore Uni-Lats can handle severe alignment errors. This is a valuable feature in densely packaged and blind assemblies where alignment is difficult to verify or rectify. While severe misalignment can accelerate the erosion of bearing pre-load, it will not precipitate catastrophic failure.,Suitable for connecting to light servo and stepper drives, encoders, resolvers, tachogenerators, and to instrumentation applications generally.
Accommodates considerable misalignment
Low inertia
Non-magnetic
Electrically isolating
Corrosion resistant
Torsional damping
Zero backlash
May be used with RS bore reducers
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 37,70
Всеки (ex VAT)
1
€ 37,70
Всеки (ex VAT)
1
Купете в насипно състояние
| количество | Единична цена |
|---|---|
| 1 - 4 | € 37,70 |
| 5 - 9 | € 36,20 |
| 10+ | € 35,43 |
Технически документи
Спецификации
Brand
HucoCoupling Types
Universal Lateral
Bore
3/8in
Outside Diameter
1.1in
Length
1in
Torque Rating
1.7Nm
Misalignment - Angular
2°
Misalignment - Parallel
0.2mm
Страна на произход
United Kingdom
Детайли за продукта
Uni-Lat® Couplings
Uni-Lat lateral displacement couplers uniquely combine the mechanisms of the universal joint and the Oldham type coupling to compensate for simultaneous parallel and angular shaft offsets. Parallel misalignment is accommodated by lateral displacement, therefore Uni-Lats can handle severe alignment errors. This is a valuable feature in densely packaged and blind assemblies where alignment is difficult to verify or rectify. While severe misalignment can accelerate the erosion of bearing pre-load, it will not precipitate catastrophic failure.,Suitable for connecting to light servo and stepper drives, encoders, resolvers, tachogenerators, and to instrumentation applications generally.
Accommodates considerable misalignment
Low inertia
Non-magnetic
Electrically isolating
Corrosion resistant
Torsional damping
Zero backlash
May be used with RS bore reducers