Технически документи
Спецификации
Brand
Texas InstrumentsComparator Type
Low Power
Mounting Type
Surface Mount
Package Type
SOIC
Power Supply Type
Single
Output Type
Open Drain
Number of Channels per Chip
4
Typical Response Time
2.5µs
Pin Count
14
Typical Single Supply Voltage
5 V
Dimensions
8.65 x 3.91 x 1.58mm
Length
8.65mm
Width
3.91mm
Height
1.58mm
Typical CMRR
84dB
Minimum Operating Temperature
0 °C
Maximum Operating Temperature
+70 °C
Детайли за продукта
TLC series LinCMOS Comparators
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
Стандарт
5
P.O.A.
Стандарт
5
Технически документи
Спецификации
Brand
Texas InstrumentsComparator Type
Low Power
Mounting Type
Surface Mount
Package Type
SOIC
Power Supply Type
Single
Output Type
Open Drain
Number of Channels per Chip
4
Typical Response Time
2.5µs
Pin Count
14
Typical Single Supply Voltage
5 V
Dimensions
8.65 x 3.91 x 1.58mm
Length
8.65mm
Width
3.91mm
Height
1.58mm
Typical CMRR
84dB
Minimum Operating Temperature
0 °C
Maximum Operating Temperature
+70 °C
Детайли за продукта
TLC series LinCMOS Comparators
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.