Telemecanique Sensors XY2CE Rope Pull Switch, 2 x 35 → 2 x 100m, 2NO/2NC
Технически документи
Спецификации
Normal State Configuration
2NO/2NC
Cable Length
2 x 35 → 2 x 100m
IP Rating
IP66
Number of Poles
DPST
Series
XY2CE
Range
Preventa XY2
Length
285mm
Width
106mm
Depth
142mm
Housing Material
Stainless Steel
Hazardous Area Certification
ATEX
Standards Met
CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508
Conduit Entry
1/2 in NPT
Maximum AC Voltage
24 → 130V
Maximum Operating Temperature
+70°C
Maximum DC Voltage
24 → 130V
Dimensions
285 x 106 x 142mm
Minimum Operating Temperature
-25°C
Детайли за продукта
Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches
Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 435,87
Всеки (ex VAT)
1
€ 435,87
Всеки (ex VAT)
1
Технически документи
Спецификации
Normal State Configuration
2NO/2NC
Cable Length
2 x 35 → 2 x 100m
IP Rating
IP66
Number of Poles
DPST
Series
XY2CE
Range
Preventa XY2
Length
285mm
Width
106mm
Depth
142mm
Housing Material
Stainless Steel
Hazardous Area Certification
ATEX
Standards Met
CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508
Conduit Entry
1/2 in NPT
Maximum AC Voltage
24 → 130V
Maximum Operating Temperature
+70°C
Maximum DC Voltage
24 → 130V
Dimensions
285 x 106 x 142mm
Minimum Operating Temperature
-25°C
Детайли за продукта
Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches
Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m