Вземете 7 % отстъпка за всички онлайн поръчки след регистрация с RS.

регистрирайте се сега

TE Connectivity Transparent Polyolefin Solder Sleeve 29.3mm Length 1.5 → 4.8mm Cable Diameter

Номер на артикул на RS: 542-5707Марка: TE Connectivity№ по каталога на производителя: B-155-05
brand-logo

Технически документи

Спецификации

Minimum Cable Diameter

1.5mm

Maximum Cable Diameter

4.8mm

Sleeve Length

29.3mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

1

Colour

Transparent

Страна на произход

Mexico

Детайли за продукта

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Може да се интересувате от

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

P.O.A.

TE Connectivity Transparent Polyolefin Solder Sleeve 29.3mm Length 1.5 → 4.8mm Cable Diameter

P.O.A.

TE Connectivity Transparent Polyolefin Solder Sleeve 29.3mm Length 1.5 → 4.8mm Cable Diameter
Информацията за складовите наличности временно не е налична.
Може да се интересувате от

Технически документи

Спецификации

Minimum Cable Diameter

1.5mm

Maximum Cable Diameter

4.8mm

Sleeve Length

29.3mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

1

Colour

Transparent

Страна на произход

Mexico

Детайли за продукта

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Може да се интересувате от