STMicroelectronics MOSFET Driver for VN7008AJ
Технически документи
Спецификации
Brand
STMicroelectronicsPower Management Function
MOSFET Driver
Kit Classification
Evaluation Board
Featured Device
VN7008AJ
Детайли за продукта
EV-VN7008AJ Automotive High-Side Driver Evaluation Board
The EV-VN7008AJ board features the VN7008AJ Smart high-side driver with CurrentSense feedback device designed for Automotive applications. An on-board set of components enables the user to directly connect the load, the power supply and a microcontroller without any additional design effort.
Operating voltage range: +4 to +28Vdc
Maximum output current: 96A (limited)
Very low standby current: 0.5μA
Drives +12V automotive grounded loads through a 3V/5V CMOS-compatible interface
Dedicated high precision proportional load current sensing
OFF-state open-load detection
Output short to Vcc detection
Undervoltage shutdown
Overvoltage clamp
Load current limitation
Self-limiting of fast thermal transients
Configurable latch-off on overtemperature or power limitation with Fault Reset pin
Loss of ground and loss of Vcc protection
Reverse battery protection with external components
Electrostatic discharge protection
Sockets/Pads for current-sensing resistor
Output via screw terminal connector
Dimensions: 25 x 41.5mm
Intelligent Power Switches, STMicroelectronics
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 62,52
Всеки (ex VAT)
1
€ 62,52
Всеки (ex VAT)
1
Купете в насипно състояние
количество | Единична цена |
---|---|
1 - 1 | € 62,52 |
2 - 4 | € 60,87 |
5 - 9 | € 59,32 |
10+ | € 57,83 |
Технически документи
Спецификации
Brand
STMicroelectronicsPower Management Function
MOSFET Driver
Kit Classification
Evaluation Board
Featured Device
VN7008AJ
Детайли за продукта
EV-VN7008AJ Automotive High-Side Driver Evaluation Board
The EV-VN7008AJ board features the VN7008AJ Smart high-side driver with CurrentSense feedback device designed for Automotive applications. An on-board set of components enables the user to directly connect the load, the power supply and a microcontroller without any additional design effort.
Operating voltage range: +4 to +28Vdc
Maximum output current: 96A (limited)
Very low standby current: 0.5μA
Drives +12V automotive grounded loads through a 3V/5V CMOS-compatible interface
Dedicated high precision proportional load current sensing
OFF-state open-load detection
Output short to Vcc detection
Undervoltage shutdown
Overvoltage clamp
Load current limitation
Self-limiting of fast thermal transients
Configurable latch-off on overtemperature or power limitation with Fault Reset pin
Loss of ground and loss of Vcc protection
Reverse battery protection with external components
Electrostatic discharge protection
Sockets/Pads for current-sensing resistor
Output via screw terminal connector
Dimensions: 25 x 41.5mm