Технически документи
Спецификации
Brand
SimexProperties Measured
Temperature
Display Type
Digital
Cutout Height
80mm
Cutout Width
110mm
Number Of Digits
4
Depth
67mm
Digit Height
20 mm
Minimum Temperature
0°C
Maximum Temperature
+50°C
Meter Type
Temperature
Series
SRT-N118
Страна на произход
Poland
Детайли за продукта
SRT-N118/N118_XA Temperature Controller
The SRT-N118 and SRT-N118_XA are designed for temperature measurement. The SRT-N118 model is equipped with Pt100/500/1000 type input with automatic connection recognition. Whereas the SRT-N118_XA is equipped with thermocouple input (K, S, J, T, N, R, B, E) and the measurement range depends on connected thermocouple type.
The temperature controllers are equipped with 4 buttons that are used for programming main presets. For a high degree of protection, the keyboard is mounted under a transparent cover.
4-digit (20 mm) LED display
2 relay outputs
RS485/Modbus RTU communication interface
Configuration with local keyboard or free S-Config software via RS485 port
Signal peak value detection
Free configuration software S-Config
Suitable for operations in harsh environments
Wall mounted, IP67 housing
Simex Temperature Controllers
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 138,78
Всеки (ex VAT)
1
€ 138,78
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
SimexProperties Measured
Temperature
Display Type
Digital
Cutout Height
80mm
Cutout Width
110mm
Number Of Digits
4
Depth
67mm
Digit Height
20 mm
Minimum Temperature
0°C
Maximum Temperature
+50°C
Meter Type
Temperature
Series
SRT-N118
Страна на произход
Poland
Детайли за продукта
SRT-N118/N118_XA Temperature Controller
The SRT-N118 and SRT-N118_XA are designed for temperature measurement. The SRT-N118 model is equipped with Pt100/500/1000 type input with automatic connection recognition. Whereas the SRT-N118_XA is equipped with thermocouple input (K, S, J, T, N, R, B, E) and the measurement range depends on connected thermocouple type.
The temperature controllers are equipped with 4 buttons that are used for programming main presets. For a high degree of protection, the keyboard is mounted under a transparent cover.
4-digit (20 mm) LED display
2 relay outputs
RS485/Modbus RTU communication interface
Configuration with local keyboard or free S-Config software via RS485 port
Signal peak value detection
Free configuration software S-Config
Suitable for operations in harsh environments
Wall mounted, IP67 housing