RS PRO Black Plastic Sheet, 500mm x 300mm x 16mm
Технически документи
Спецификации
Brand
RS ProColour
Black
Form
Full
Length
500mm
Width
300mm
Thickness
16mm
Material
PA
Laminated
No
Density
1.14g/cm³
Tensile Strength
75 MPa
Flammability Rating
UL 94 HB
Water Absorption
7%
Maximum Operating Temperature
+100°C
Elongation
25%
Страна на произход
Germany
Детайли за продукта
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
RS ProColour
Black
Form
Full
Length
500mm
Width
300mm
Thickness
16mm
Material
PA
Laminated
No
Density
1.14g/cm³
Tensile Strength
75 MPa
Flammability Rating
UL 94 HB
Water Absorption
7%
Maximum Operating Temperature
+100°C
Elongation
25%
Страна на произход
Germany
Детайли за продукта
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.