Phoenix Contact 3RS70 Series Configurable Frequency Converter, Frequency Input
Технически документи
Спецификации
Brand
Phoenix ContactInput Signal Type
Frequency
Input Range
0.002 Hz → 20kHz
Mounting Type
DIN Rail
Operating Temperature Range
-20 → +65°C
Minimum Operating Temperature
-20°C
Series
3RS70
Maximum Operating Temperature
+65°C
Signal Conditioner Type
Frequency to Current, Frequency to Voltage
Supply Voltage
9.6 → 30 V dc
Supply Voltage
9.6 → 30 V dc
Детайли за продукта
Frequency Converter to Current/Voltage
Phoenix Contacts 2902832 is a 3-way, configurable isolated frequency transducer. This transducer can accept NAMUR proximity sensors, NPN and PNP outputs. Not to mention, this module has a DIP switches on the side that allow you to configure the device easily. The modules frequency range can also be adjusted by the teach-in wheel.
2902832 will convert any measured signal into linear current or a voltage signal, while also fully supporting fault monitoring.
Features and benefits:
- Easily configurable by the DIP switch located on the side
- LED Indicator provides easy diagnostics
- Approval for Ex-zone 2 installations
- Mounted easily on a DIN rail
- -20°C to +65°C operating temperatures
- 0.002 Hz up to 20 kHz measuring range
Accessories:
TBUS DIN rail connector – 489-2825
Power terminal block – 785-7787
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
Phoenix ContactInput Signal Type
Frequency
Input Range
0.002 Hz → 20kHz
Mounting Type
DIN Rail
Operating Temperature Range
-20 → +65°C
Minimum Operating Temperature
-20°C
Series
3RS70
Maximum Operating Temperature
+65°C
Signal Conditioner Type
Frequency to Current, Frequency to Voltage
Supply Voltage
9.6 → 30 V dc
Supply Voltage
9.6 → 30 V dc
Детайли за продукта
Frequency Converter to Current/Voltage
Phoenix Contacts 2902832 is a 3-way, configurable isolated frequency transducer. This transducer can accept NAMUR proximity sensors, NPN and PNP outputs. Not to mention, this module has a DIP switches on the side that allow you to configure the device easily. The modules frequency range can also be adjusted by the teach-in wheel.
2902832 will convert any measured signal into linear current or a voltage signal, while also fully supporting fault monitoring.
Features and benefits:
- Easily configurable by the DIP switch located on the side
- LED Indicator provides easy diagnostics
- Approval for Ex-zone 2 installations
- Mounted easily on a DIN rail
- -20°C to +65°C operating temperatures
- 0.002 Hz up to 20 kHz measuring range
Accessories:
TBUS DIN rail connector – 489-2825
Power terminal block – 785-7787