Технически документи
Спецификации
Детайли за продукта
Arlo Mobile Robot Wheel Kit
The Parallax motor mount is the wheel kit for the other two kits. This motor is the aluminium version so it provides a toughened chassis over the plastic. It can hold a total of 27kg with rugged tyres. Two independent motors drive the wheels so you can get the odometry feedback of your choice.
The Arlo robot is a mobile robot design to carry payloads. It is an indoor robot and uses a microcontroller for control. It is highly customizable with sensors and computers.
Features and benefits:
Aluminium makes for a tough chassis with an increased payload support.
36-step optical slotted disk with quadrature output on each axle.
Rugged inner-tubed tyres pneumatic tyres
Maximum payload of 27KG
Torque of 85lbs per motor assembly
Wheel rotation with no load: 100rpm
Whats in the kit?
Two 12 VDC Motors. (Left & Right)
36 Position quadrature encoder set
Two motor bearing blocks.
Two Main rims
Two rim rings
Two robot drive axles
Two 1/8 x 1 Roll Pink
Two Knobby tires with rubber tube
Two 0.5 ID x 1.125 OD Ball Bearing
Two Hex keys (5mm & 5/32)
All screws and spacers.
This is only the wheel kit, to have a fully functioning robot you will need the below kits.
Base Kit: 8430822
Top Kit: 8430796
Supplied with
All necessary screws and spacers
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 374,51
Всеки (ex VAT)
1
€ 374,51
Всеки (ex VAT)
1
Купете в насипно състояние
количество | Единична цена |
---|---|
1 - 1 | € 374,51 |
2+ | € 363,27 |
Технически документи
Спецификации
Детайли за продукта
Arlo Mobile Robot Wheel Kit
The Parallax motor mount is the wheel kit for the other two kits. This motor is the aluminium version so it provides a toughened chassis over the plastic. It can hold a total of 27kg with rugged tyres. Two independent motors drive the wheels so you can get the odometry feedback of your choice.
The Arlo robot is a mobile robot design to carry payloads. It is an indoor robot and uses a microcontroller for control. It is highly customizable with sensors and computers.
Features and benefits:
Aluminium makes for a tough chassis with an increased payload support.
36-step optical slotted disk with quadrature output on each axle.
Rugged inner-tubed tyres pneumatic tyres
Maximum payload of 27KG
Torque of 85lbs per motor assembly
Wheel rotation with no load: 100rpm
Whats in the kit?
Two 12 VDC Motors. (Left & Right)
36 Position quadrature encoder set
Two motor bearing blocks.
Two Main rims
Two rim rings
Two robot drive axles
Two 1/8 x 1 Roll Pink
Two Knobby tires with rubber tube
Two 0.5 ID x 1.125 OD Ball Bearing
Two Hex keys (5mm & 5/32)
All screws and spacers.
This is only the wheel kit, to have a fully functioning robot you will need the below kits.
Base Kit: 8430822
Top Kit: 8430796
Supplied with
All necessary screws and spacers