Omron D4B-N Series Rod Limit Switch, 1NC/1NO, DPST, Aluminium Housing
Технически документи
Спецификации
Brand
OmronActuator Type
Rod
Pole and Throw Configuration
DPST
Normal State Configuration
1NC/1NO
Housing Material
Aluminium
Connection Type
M20
Series
D4B-N
Action Type
Snap Action
Length
99.5mm
Minimum Operating Temperature
-40°C
Depth
43mm
Width
40mm
Maximum Operating Temperature
'+80°C
Standards Met
CE
Operating Force
2.12 N
Mechanical Life
30000000Cycles
Детайли за продукта
D4B-N Series General Purpose Snap Action
The D4B-N Safety Limit Switch from Omron has snap-action contacts with a certified direct opening mechanism, N/C contacts only, to ensure safe operation should a fault occur. The switch is housed in an aluminium die-cast enclosure and has the head seal structure strengthened to provide IP67 protection.
Equipped with a mechanism that indicates the applicable operating zone, as well as push-button switching to control left and right motion
Accurate switching with safe operation via direct drive positive contact opening even with metal deposition between mating contacts
N/C for safety circuit and N/O for control circuit (SPDT)
Contact rating: 10A continuous
Four position turret head
IP67 aluminium die-cast enclosure
Conduit entry PG13.5 or M20
Operating temperature range: -40° to +80°C
Approvals
UL, CSA
Standards
EN60947-5-1 and IEC 947-5-1
Safety Limit Switch
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 76,90
€ 76,90 Всеки (ex VAT)
1
€ 76,90
€ 76,90 Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
OmronActuator Type
Rod
Pole and Throw Configuration
DPST
Normal State Configuration
1NC/1NO
Housing Material
Aluminium
Connection Type
M20
Series
D4B-N
Action Type
Snap Action
Length
99.5mm
Minimum Operating Temperature
-40°C
Depth
43mm
Width
40mm
Maximum Operating Temperature
'+80°C
Standards Met
CE
Operating Force
2.12 N
Mechanical Life
30000000Cycles
Детайли за продукта
D4B-N Series General Purpose Snap Action
The D4B-N Safety Limit Switch from Omron has snap-action contacts with a certified direct opening mechanism, N/C contacts only, to ensure safe operation should a fault occur. The switch is housed in an aluminium die-cast enclosure and has the head seal structure strengthened to provide IP67 protection.
Equipped with a mechanism that indicates the applicable operating zone, as well as push-button switching to control left and right motion
Accurate switching with safe operation via direct drive positive contact opening even with metal deposition between mating contacts
N/C for safety circuit and N/O for control circuit (SPDT)
Contact rating: 10A continuous
Four position turret head
IP67 aluminium die-cast enclosure
Conduit entry PG13.5 or M20
Operating temperature range: -40° to +80°C
Approvals
UL, CSA
Standards
EN60947-5-1 and IEC 947-5-1