Huco Universal Joint 103.16.3131, Single, Plain, Bore 3/8 x 3/8in, 67.6mm Length
Технически документи
Спецификации
Brand
HucoBore
3/8 x 3/8in
Number of Joints
Single
Hub Outer Diameter
17.5mm
Overall Length
67.6mm
Joint Type
Plain
Hub Type
Bored Hub
Maximum Working Angle
45°
Peak Torque
1.6Nm
Material
Brass
Maximum Speed
1000rpm
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Страна на произход
United Kingdom
Детайли за продукта
Miniature Acetal Fork Universal Joint
A comprehensive range of light duty universal joints manufactured in non-ferrous metals and Acetal, with a -40 to 85°C operating range.
Corrosion resistant construction
Freedom from backlash
No lubrication required
Electrical isolation between shafts
Available with metric or imperial bore sizes at both ends, or as combination metric/imperial types
Additional bore combinations can be created using suitable reducing bushes, see Bushes, Clamps & Collars - Bore Reducing Bushes.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 35,536
Each (In a Pack of 2) (ex VAT)
2
€ 35,536
Each (In a Pack of 2) (ex VAT)
2
Купете в насипно състояние
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 2 - 8 | € 35,536 | € 71,07 |
| 10 - 18 | € 34,112 | € 68,22 |
| 20+ | € 33,405 | € 66,81 |
Технически документи
Спецификации
Brand
HucoBore
3/8 x 3/8in
Number of Joints
Single
Hub Outer Diameter
17.5mm
Overall Length
67.6mm
Joint Type
Plain
Hub Type
Bored Hub
Maximum Working Angle
45°
Peak Torque
1.6Nm
Material
Brass
Maximum Speed
1000rpm
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+60°C
Страна на произход
United Kingdom
Детайли за продукта
Miniature Acetal Fork Universal Joint
A comprehensive range of light duty universal joints manufactured in non-ferrous metals and Acetal, with a -40 to 85°C operating range.
Corrosion resistant construction
Freedom from backlash
No lubrication required
Electrical isolation between shafts
Available with metric or imperial bore sizes at both ends, or as combination metric/imperial types
Additional bore combinations can be created using suitable reducing bushes, see Bushes, Clamps & Collars - Bore Reducing Bushes.