Технически документи
Спецификации
Brand
EssentraPCB Support Type
Adhesive-Backed Support
Overall Height
21.4mm
Body Height
12.7mm
Support Base Dimensions
12.7 x 12.7mm
PCB Hole Diameter
3.18mm
PCB Thickness
1.57mm
Material
Nylon
Support Base Length
12.7mm
Support Base Width
12.7mm
Страна на произход
United Kingdom
Детайли за продукта
Miniature Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 0,326
Each (In a Pack of 50) (ex VAT)
50
€ 0,326
Each (In a Pack of 50) (ex VAT)
50
Купете в насипно състояние
количество | Единична цена | Per Опаковка |
---|---|---|
50 - 450 | € 0,326 | € 16,32 |
500 - 950 | € 0,312 | € 15,61 |
1000 - 2450 | € 0,303 | € 15,14 |
2500+ | € 0,277 | € 13,86 |
Технически документи
Спецификации
Brand
EssentraPCB Support Type
Adhesive-Backed Support
Overall Height
21.4mm
Body Height
12.7mm
Support Base Dimensions
12.7 x 12.7mm
PCB Hole Diameter
3.18mm
PCB Thickness
1.57mm
Material
Nylon
Support Base Length
12.7mm
Support Base Width
12.7mm
Страна на произход
United Kingdom
Детайли за продукта
Miniature Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm