Eccel Technology Ltd OEM-MICODE-RS232 (000127) RFID Reader, 5V
Технически документи
Спецификации
Brand
Eccel Technology LtdComponent Type
Reader
Supported Bus Interfaces
RS232
Supply Voltage
5V
Length
75mm
Width
50mm
Страна на произход
United Kingdom
Детайли за продукта
OEM-MICODE RFID Reader Boards
The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k,
Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, antenna-trimming capacitor and LEDs for visual indication of card acceptance. The J2 connector also allows the OEMMICODE board to be reprogrammed with custom firmware.
Two versions are available:
RS232 connector requiring 5 V supply (RS 1262182)
USB using USB bus for power supply (RS 1262181)
Features:
Complete plug-and-go RFID Read / Write system
Integrated PCB antenna, LEDS, RS232 or USB interface.
Supports Mifare 1k, 4k, Ultralight and ICODE (including contactless read/write to Mifare
ProX, SmartMX / JCOP cards)
Average current consumption down to 100 micro Amps even when fully active
Auxiliary output options for automatic data output as serial or Wiegand protocol
RFID - Eccel
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
Eccel Technology LtdComponent Type
Reader
Supported Bus Interfaces
RS232
Supply Voltage
5V
Length
75mm
Width
50mm
Страна на произход
United Kingdom
Детайли за продукта
OEM-MICODE RFID Reader Boards
The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k,
Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, antenna-trimming capacitor and LEDs for visual indication of card acceptance. The J2 connector also allows the OEMMICODE board to be reprogrammed with custom firmware.
Two versions are available:
RS232 connector requiring 5 V supply (RS 1262182)
USB using USB bus for power supply (RS 1262181)
Features:
Complete plug-and-go RFID Read / Write system
Integrated PCB antenna, LEDS, RS232 or USB interface.
Supports Mifare 1k, 4k, Ultralight and ICODE (including contactless read/write to Mifare
ProX, SmartMX / JCOP cards)
Average current consumption down to 100 micro Amps even when fully active
Auxiliary output options for automatic data output as serial or Wiegand protocol