Eaton 6P Pole Isolator Switch - 32A Maximum Current, 13kW Power Rating, IP65
Технически документи
Спецификации
Brand
EatonNumber of Poles
6P
Maximum Current
32A
IP Rating
IP65
Power Rating
13kW
Voltage Rating
400V ac
Accepts Padlocks
Yes
Handle Colour
Red
Normal State Configuration
NO/NC
Length
180mm
Width
100mm
Depth
100mm
Throw Configuration
Single
Terminal Type
Screw
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+40°C
Страна на произход
United Kingdom
Детайли за продукта
Eaton Non-Fused Switch Disconnectors - T3 Series Rotary Switches
The T3 series of switch disconnectors from Eaton are compact and robust. Rotary Cam Switches can be used for many switching and control applications, for example as ON-OFF, main, main/control, or instrument switches. The device consists of a hand actuator, the switch unit and the mounting accessories. This range of isolator switches is also suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
Performs local isolation, manual override & safety switch functions
T3 Series fit a standard front plate of 45 x 45 mm
For spare rotary thumb stick (black) see stock no. 176-9759
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 145,84
Всеки (ex VAT)
1
€ 145,84
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
EatonNumber of Poles
6P
Maximum Current
32A
IP Rating
IP65
Power Rating
13kW
Voltage Rating
400V ac
Accepts Padlocks
Yes
Handle Colour
Red
Normal State Configuration
NO/NC
Length
180mm
Width
100mm
Depth
100mm
Throw Configuration
Single
Terminal Type
Screw
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
+40°C
Страна на произход
United Kingdom
Детайли за продукта
Eaton Non-Fused Switch Disconnectors - T3 Series Rotary Switches
The T3 series of switch disconnectors from Eaton are compact and robust. Rotary Cam Switches can be used for many switching and control applications, for example as ON-OFF, main, main/control, or instrument switches. The device consists of a hand actuator, the switch unit and the mounting accessories. This range of isolator switches is also suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
Performs local isolation, manual override & safety switch functions
T3 Series fit a standard front plate of 45 x 45 mm
For spare rotary thumb stick (black) see stock no. 176-9759
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.