Vishay TSOP31438, 38kHz IR Receiver, 950nm ±45 °, 45m Range, 2.5 V - 5.5V, Through Hole, 10 x 5.8 x 12.5mm
Технически документи
Спецификации
Brand
VishayCarrier Frequency
38kHz
Maximum Transmission Distance
45m
Angle of Half Transmission Distance
±45 °
Wavelength of Peak Sensitivity
950nm
Daylight Filter Type
Epoxy Package
Output Current
5mA
Components
Photo Detector, Preamplifier
Number of Pins
3
Mounting Type
Through Hole
Dimensions
10 x 5.8 x 12.5mm
Height
12.5mm
Length
10mm
Maximum Supply Voltage
5.5V
Minimum Supply Voltage
2.5V
Width
5.8mm
Supply Voltage Range
2.5 → 5.5 V
Страна на произход
Philippines
Детайли за продукта
Vishay TSOP312/314 Series IR Receiver Modules
The TSOP312.., TSOP314..series are miniaturized IR receiver modules for infrared remote control systems. A PIN diode and a preamplifier are assembled on a leadframe, the epoxy package contains an IR filter.
The demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP314.. series devices are optimized to suppress almost all spurious pulses from energy saving lamps like CFLs. The AGC4 used in the TSOP314.. may suppress some data signals. The TSOP312.. series are provided primarily for compatibility with old AGC2 designs. New designs should prefer the TSOP314.. series containing the newer AGC4.
These components have not been qualified according to automotive specifications.
• Very low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Insensitive to supply voltage ripple and noise
IR Remote Control Receivers, Vishay Semiconductor
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 0,368
Each (In a Bag of 2) (ex VAT)
2
€ 0,368
Each (In a Bag of 2) (ex VAT)
2
Технически документи
Спецификации
Brand
VishayCarrier Frequency
38kHz
Maximum Transmission Distance
45m
Angle of Half Transmission Distance
±45 °
Wavelength of Peak Sensitivity
950nm
Daylight Filter Type
Epoxy Package
Output Current
5mA
Components
Photo Detector, Preamplifier
Number of Pins
3
Mounting Type
Through Hole
Dimensions
10 x 5.8 x 12.5mm
Height
12.5mm
Length
10mm
Maximum Supply Voltage
5.5V
Minimum Supply Voltage
2.5V
Width
5.8mm
Supply Voltage Range
2.5 → 5.5 V
Страна на произход
Philippines
Детайли за продукта
Vishay TSOP312/314 Series IR Receiver Modules
The TSOP312.., TSOP314..series are miniaturized IR receiver modules for infrared remote control systems. A PIN diode and a preamplifier are assembled on a leadframe, the epoxy package contains an IR filter.
The demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP314.. series devices are optimized to suppress almost all spurious pulses from energy saving lamps like CFLs. The AGC4 used in the TSOP314.. may suppress some data signals. The TSOP312.. series are provided primarily for compatibility with old AGC2 designs. New designs should prefer the TSOP314.. series containing the newer AGC4.
These components have not been qualified according to automotive specifications.
• Very low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Insensitive to supply voltage ripple and noise