Vero Technologies 96 Way Backplane Epoxy Glass 2 25.3 HP With 20.32 mm Connector Pitch
Технически документи
Спецификации
Brand
Vero TechnologiesProduct Type
Backplane
Number of Contacts
96
Sub Type
Eurocard Backplane
Board Material
Epoxy Glass
Number of Sides
2
Horizontal Pitch
25.3HP
Pitch
20.32mm
Copper Thickness
35μm
External Height
197.3mm
Board Thickness
1.6mm
Standards/Approvals
BS 9762, UL 94 V-0, BS 4584
Страна на произход
United Kingdom
Детайли за продукта
Nut Plates, Double-Sided
This series of nut plates is designed to give technicians the ability to fine-tune the backplane to the requirements of their system. Each hole is a through-hole and the connector can be wired to series B as OV to prevent cross-talk on series A and B.
The power supply is via M3 screws or 6.3 mm Faston connectors. The voltage supply to pins 1, 2, 31 and 32 is via 2.54 mm bridges. Series A, B and C can be connected using connecting strips in order to be able to supply one series with the same voltage.
The end of these connecting strips is then inserted into a through-hole where this voltage is available.
Backplane bare — please order connectors separately.
Информацията за складовите наличности временно не е налична.
€ 96,33
€ 96,33 Всеки (ex VAT)
1
€ 96,33
€ 96,33 Всеки (ex VAT)
Информацията за складовите наличности временно не е налична.
1
| количество | Единична цена |
|---|---|
| 1 - 9 | € 96,33 |
| 10 - 19 | € 85,36 |
| 20+ | € 75,81 |
Технически документи
Спецификации
Brand
Vero TechnologiesProduct Type
Backplane
Number of Contacts
96
Sub Type
Eurocard Backplane
Board Material
Epoxy Glass
Number of Sides
2
Horizontal Pitch
25.3HP
Pitch
20.32mm
Copper Thickness
35μm
External Height
197.3mm
Board Thickness
1.6mm
Standards/Approvals
BS 9762, UL 94 V-0, BS 4584
Страна на произход
United Kingdom
Детайли за продукта
Nut Plates, Double-Sided
This series of nut plates is designed to give technicians the ability to fine-tune the backplane to the requirements of their system. Each hole is a through-hole and the connector can be wired to series B as OV to prevent cross-talk on series A and B.
The power supply is via M3 screws or 6.3 mm Faston connectors. The voltage supply to pins 1, 2, 31 and 32 is via 2.54 mm bridges. Series A, B and C can be connected using connecting strips in order to be able to supply one series with the same voltage.
The end of these connecting strips is then inserted into a through-hole where this voltage is available.
Backplane bare — please order connectors separately.