Vega Radar Level Probe, PBT Body

Номер на артикул на RS: 493-6846Марка: Vega№ по каталога на производителя: FX-S.61C 2M
brand-logo
Преглед на всички в Сензори за ниво

Технически документи

Спецификации

Brand

Vega

Device Type

Radar

Body Material

PBT

Maximum Current

20 mA

Maximum Pressure

4bar

Страна на произход

Germany

Детайли за продукта

VEGAFLEX 61 Guided Microwave Radar Level Transmitter

IP66 rated
Measuring range up to 10m
Unaffected by temperature, vacuum, pressure, vapours, gases, dust, foam or build-up
Accurate to 5mm using Echofox technology
Maintenance-free rugged design
Also requires : Single stainless steel 10m long (Ø4mm) suspension cable (item 493-6830) with gravity weight, or 2m (Ø6mm) rod (item 493-6846) providing measurement to the vessel bottom (both can be shortened as required)
Display/adjustment in head via PLICSCOM module or VEGADIS 61 remote housing (both types not supplied with unit see 493-6868 and 468-3508)
2-wire (20 to 36V loop powered) technology; HART protocol with universal commands
Output signal: 0//4 to 20mA (HART)
3/4in. BSP mount
Vessel pressure: -1 to +4 bar
Housing material: PBT
Transducer material: 316 stainless steel, PCTFE Viton seals
Cable entries: 2 x M20
Simple calibration

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

P.O.A.

Vega Radar Level Probe, PBT Body

P.O.A.

Vega Radar Level Probe, PBT Body
Информацията за складовите наличности временно не е налична.

Технически документи

Спецификации

Brand

Vega

Device Type

Radar

Body Material

PBT

Maximum Current

20 mA

Maximum Pressure

4bar

Страна на произход

Germany

Детайли за продукта

VEGAFLEX 61 Guided Microwave Radar Level Transmitter

IP66 rated
Measuring range up to 10m
Unaffected by temperature, vacuum, pressure, vapours, gases, dust, foam or build-up
Accurate to 5mm using Echofox technology
Maintenance-free rugged design
Also requires : Single stainless steel 10m long (Ø4mm) suspension cable (item 493-6830) with gravity weight, or 2m (Ø6mm) rod (item 493-6846) providing measurement to the vessel bottom (both can be shortened as required)
Display/adjustment in head via PLICSCOM module or VEGADIS 61 remote housing (both types not supplied with unit see 493-6868 and 468-3508)
2-wire (20 to 36V loop powered) technology; HART protocol with universal commands
Output signal: 0//4 to 20mA (HART)
3/4in. BSP mount
Vessel pressure: -1 to +4 bar
Housing material: PBT
Transducer material: 316 stainless steel, PCTFE Viton seals
Cable entries: 2 x M20
Simple calibration