Технически документи
Спецификации
Brand
Texas InstrumentsComparator Type
Differential
Mounting Type
Through Hole
Package Type
PDIP
Power Supply Type
Single
Output Type
Open Drain
Number of Channels per Chip
1
Typical Response Time
650ns
Pin Count
8
Typical Single Supply Voltage
1.4 → 16 V
Dimensions
10.16 x 6.6 x 4.57mm
Length
10.16mm
Width
6.6mm
Height
4.57mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Страна на произход
Malaysia
Детайли за продукта
TLC series LinCMOS Comparators
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
50
P.O.A.
50
Технически документи
Спецификации
Brand
Texas InstrumentsComparator Type
Differential
Mounting Type
Through Hole
Package Type
PDIP
Power Supply Type
Single
Output Type
Open Drain
Number of Channels per Chip
1
Typical Response Time
650ns
Pin Count
8
Typical Single Supply Voltage
1.4 → 16 V
Dimensions
10.16 x 6.6 x 4.57mm
Length
10.16mm
Width
6.6mm
Height
4.57mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Страна на произход
Malaysia
Детайли за продукта
TLC series LinCMOS Comparators
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.