TE Connectivity Blue Polyvinyl Fluoride Solder Sleeve 45.5mm Length 7 mm Cable Diameter 3.6 mm Cable Diameter
Технически документи
Спецификации
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Stub Splice
Sleeve Length
45.5mm
Material
Polyvinyl Fluoride
Dielectric Strength
2kV
Minimum Cable Diameter
3.6mm
Maximum Cable Diameter
7mm
Colour
Blue
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
125°C
Series
SGRS
Страна на произход
Mexico
Детайли за продукта
SolderGrip® insulated sleeves
These sealed sleeves enable several wires to be soldered together, for applications where a high degree of reliability is essential.
Recommended for locations that would be difficult to access later.
They feature a heat-fusion adhesive insert to ensure the splice is sealed.
Easy to use: simply place the wires in the SolderGrip using a twisting movement to lock them in position and heat the assembly with a hot air source to complete the soldering process.
Информацията за складовите наличности временно не е налична.
€ 27,84
€ 2,784 Each (In a Pack of 10) (ex VAT)
10
€ 27,84
€ 2,784 Each (In a Pack of 10) (ex VAT)
Информацията за складовите наличности временно не е налична.
10
Технически документи
Спецификации
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Stub Splice
Sleeve Length
45.5mm
Material
Polyvinyl Fluoride
Dielectric Strength
2kV
Minimum Cable Diameter
3.6mm
Maximum Cable Diameter
7mm
Colour
Blue
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
125°C
Series
SGRS
Страна на произход
Mexico
Детайли за продукта
SolderGrip® insulated sleeves
These sealed sleeves enable several wires to be soldered together, for applications where a high degree of reliability is essential.
Recommended for locations that would be difficult to access later.
They feature a heat-fusion adhesive insert to ensure the splice is sealed.
Easy to use: simply place the wires in the SolderGrip using a twisting movement to lock them in position and heat the assembly with a hot air source to complete the soldering process.