TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG
Технически документи
Спецификации
Brand
TE ConnectivitySplice Type
Butt
Wire Size
16 → 14 AWG
Overall Length
36mm
Diameter
4.6mm
Insulation
Insulated
Colour
Blue
Series
Duraseal
Contact Material
Copper
Contact Plating
Tin
Страна на произход
Mexico
Детайли за продукта
Splices
Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 23,98
€ 0,48 Each (In a Pack of 50) (ex VAT)
50
€ 23,98
€ 0,48 Each (In a Pack of 50) (ex VAT)
50
Купете в насипно състояние
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 50 - 200 | € 0,48 | € 23,98 |
| 250 - 1200 | € 0,441 | € 22,07 |
| 1250 - 2450 | € 0,393 | € 19,67 |
| 2500 - 4950 | € 0,36 | € 18,00 |
| 5000+ | € 0,336 | € 16,80 |
Технически документи
Спецификации
Brand
TE ConnectivitySplice Type
Butt
Wire Size
16 → 14 AWG
Overall Length
36mm
Diameter
4.6mm
Insulation
Insulated
Colour
Blue
Series
Duraseal
Contact Material
Copper
Contact Plating
Tin
Страна на произход
Mexico
Детайли за продукта
Splices
Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed