TE Connectivity, D-436 Parallel Splice Connector, Insulated, Tin
Технически документи
Спецификации
Brand
TE ConnectivitySplice Type
Parallel
Minimum Wire Size mm²
0.15mm²
Overall Length
18.5mm
Maximum Wire Size mm²
0.75mm²
Diameter
1.02 (Minimum) mm, 1.27 (Maximum) mm
Insulation
Insulated
Insulation Material
PVDF
Series
D-436
Contact Material
Copper Alloy
Contact Plating
Tin
Страна на произход
Mexico
Детайли за продукта
TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp Splices
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is critical. MiniSeal splices consist of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve. The insulation sleeve provides environmental protection to the electrical connection against liquids such as hydraulic fluid, aviation fuel and lubrication fluids and the resulting chemical and galvanic corrosion. The heat-shrinkable sleeve also provides strain relief for the splice. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft, aerospace vehicles and similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used.
Features and Benefits
Small and lightweight design
Easy one-step installation
Immersion resistant
Environmentally sealed against liquid penetration and resulting corrosion
Suitable for use in harsh environments
MIL spec M8184/1 versions available
Applications
These MiniSeal immersion resistant crimp splices are suitable for use in harsh environments within the aerospace and defence industries
Standards
MIL-S-81824/1
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 4,74
Each (In a Pack of 10) (ex VAT)
10
€ 4,74
Each (In a Pack of 10) (ex VAT)
10
Купете в насипно състояние
| количество | Единична цена | Per Опаковка |
|---|---|---|
| 10 - 40 | € 4,74 | € 47,40 |
| 50+ | € 4,124 | € 41,24 |
Технически документи
Спецификации
Brand
TE ConnectivitySplice Type
Parallel
Minimum Wire Size mm²
0.15mm²
Overall Length
18.5mm
Maximum Wire Size mm²
0.75mm²
Diameter
1.02 (Minimum) mm, 1.27 (Maximum) mm
Insulation
Insulated
Insulation Material
PVDF
Series
D-436
Contact Material
Copper Alloy
Contact Plating
Tin
Страна на произход
Mexico
Детайли за продукта
TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp Splices
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is critical. MiniSeal splices consist of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve. The insulation sleeve provides environmental protection to the electrical connection against liquids such as hydraulic fluid, aviation fuel and lubrication fluids and the resulting chemical and galvanic corrosion. The heat-shrinkable sleeve also provides strain relief for the splice. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft, aerospace vehicles and similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used.
Features and Benefits
Small and lightweight design
Easy one-step installation
Immersion resistant
Environmentally sealed against liquid penetration and resulting corrosion
Suitable for use in harsh environments
MIL spec M8184/1 versions available
Applications
These MiniSeal immersion resistant crimp splices are suitable for use in harsh environments within the aerospace and defence industries
Standards
MIL-S-81824/1