TE Connectivity Splice Connector, Red, Insulated, Nickel 26 → 20 AWG
Технически документи
Спецификации
Brand
TE ConnectivityWire Size
26 → 20 AWG
Overall Length
27.94mm
Diameter
2.03mm
Insulation
Insulated
Colour
Red
Insulation Material
Modified Polyvinylidene
Contact Material
Copper Alloy
Contact Plating
Nickel
Страна на произход
Mexico
Детайли за продукта
TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp In-Line Butt Splices
MiniSeal high performance immersion-resistant crimp in-line butt splices consisting of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve made from radiation cross-linked polyvinylidene fluoride. These MiniSeal™ crimp splices are environmentally sealed and maintain the quality of the electrical connection and seal the splice against corrosion, galvanic action over time and exposure to harsh environments. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft and aerospace vehicles, or similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used
For wire sizes and splice configurations please see table.
Splices
€ 451,84
€ 4,518 Each (In a Box of 100) (ex VAT)
100
€ 451,84
€ 4,518 Each (In a Box of 100) (ex VAT)
100
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
Технически документи
Спецификации
Brand
TE ConnectivityWire Size
26 → 20 AWG
Overall Length
27.94mm
Diameter
2.03mm
Insulation
Insulated
Colour
Red
Insulation Material
Modified Polyvinylidene
Contact Material
Copper Alloy
Contact Plating
Nickel
Страна на произход
Mexico
Детайли за продукта
TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp In-Line Butt Splices
MiniSeal high performance immersion-resistant crimp in-line butt splices consisting of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve made from radiation cross-linked polyvinylidene fluoride. These MiniSeal™ crimp splices are environmentally sealed and maintain the quality of the electrical connection and seal the splice against corrosion, galvanic action over time and exposure to harsh environments. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft and aerospace vehicles, or similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used
For wire sizes and splice configurations please see table.