Технически документи
Спецификации
Brand
TE ConnectivityType
Tab
Series
Duraseal
Minimum Wire Size mm²
0.5mm²
Gender
Male
Maximum Wire Size mm²
1mm²
Tab Size
6.35 x 0.8mm
Tab Width
6.35mm
Tab Thickness
0.8mm
Insulation
Insulated
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Termination Method
Crimp
Colour
Red
Contact Material
Brass
Contact Plating
Tin
Insulation Material
Nylon
Страна на произход
Mexico
Детайли за продукта
Duraseal Blade
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 965,34
1 Bag of 1000 (ex VAT)
1
€ 965,34
1 Bag of 1000 (ex VAT)
1
Технически документи
Спецификации
Brand
TE ConnectivityType
Tab
Series
Duraseal
Minimum Wire Size mm²
0.5mm²
Gender
Male
Maximum Wire Size mm²
1mm²
Tab Size
6.35 x 0.8mm
Tab Width
6.35mm
Tab Thickness
0.8mm
Insulation
Insulated
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Termination Method
Crimp
Colour
Red
Contact Material
Brass
Contact Plating
Tin
Insulation Material
Nylon
Страна на произход
Mexico
Детайли за продукта
Duraseal Blade
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed