STMicroelectronics Flyback Converter for VIPER38HD for Flyback Convert
Технически документи
Спецификации
Brand
STMicroelectronicsPower Management Function
Flyback Converter
For Use With
Flyback Convert
Kit Classification
Evaluation Board
Featured Device
VIPER38HD
Детайли за продукта
STEVAL-ISA182V1, VIPerPlus 8.4W (30W Peak) Power Offline Flyback Converter
The STEVAL-ISA182V1 Evaluation Board implements an isolated flyback converter at 12 V, 700 mA, 8.4 W with 30 W peak. Using the VIPER38HD, a high-voltage converter with fixed frequency of 115 kHz (H type), that integrates an 800 V rugged power MOSFET with PWM current-mode control.
High-level protections feature dual-level overcurrent protection (OCP), output overvoltage, short circuit, and thermal shutdown with hysteresis. The OCP comes with selectable threshold. Another OCP with a higher value protects the VIPER38HD from transformer saturation or short circuit of the secondary diode.
Embedded High-Voltage Start-up and Sense FET
30 mW No-Load Consumption at 230 V ac
Jittered Frequency reduces the EMI
Extra Power Timer (EPT) blanks the overload current for few seconds
Output Overvoltage protection with tight tolerance and Digital Noise Filter
Soft-start reduces the stress during start-up which increases the lifetime
Automatic Restart after a fault condition
AC/DC Converters, STMicroelectronics
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
STMicroelectronicsPower Management Function
Flyback Converter
For Use With
Flyback Convert
Kit Classification
Evaluation Board
Featured Device
VIPER38HD
Детайли за продукта
STEVAL-ISA182V1, VIPerPlus 8.4W (30W Peak) Power Offline Flyback Converter
The STEVAL-ISA182V1 Evaluation Board implements an isolated flyback converter at 12 V, 700 mA, 8.4 W with 30 W peak. Using the VIPER38HD, a high-voltage converter with fixed frequency of 115 kHz (H type), that integrates an 800 V rugged power MOSFET with PWM current-mode control.
High-level protections feature dual-level overcurrent protection (OCP), output overvoltage, short circuit, and thermal shutdown with hysteresis. The OCP comes with selectable threshold. Another OCP with a higher value protects the VIPER38HD from transformer saturation or short circuit of the secondary diode.
Embedded High-Voltage Start-up and Sense FET
30 mW No-Load Consumption at 230 V ac
Jittered Frequency reduces the EMI
Extra Power Timer (EPT) blanks the overload current for few seconds
Output Overvoltage protection with tight tolerance and Digital Noise Filter
Soft-start reduces the stress during start-up which increases the lifetime
Automatic Restart after a fault condition