STEGO Changeover Enclosure Thermostat, 12 → 48 V, -20 → +60 °C

Номер на артикул на RS: 901-0586Марка: STEGO№ по каталога на производителя: 01131.2-00
brand-logo
Преглед на всички в Термостати

Технически документи

Спецификации

Brand

STEGO

Switch Configuration

Changeover

Supply Voltage

12 → 48 V

Maximum Temperature

+60 °C

Minimum Temperature

-20 °C

Temperature Range

-20 → +60 °C

Страна на произход

Germany

Детайли за продукта

Stego Electronic Thermostat 12-48Vdc, ETL 011

ETL 011 range of electronic thermostats register the air temperature and can switch signal currents using an internal relay. The ETL 011 can control signal processing devices directly. If the application system requires you to control heating and cooling equipment such as filter fans a switch module is required.The status of the contacts 1-2 is shown via the LED integrated into the adjustment knob.

large setting range.
Small hysteresis.
Optical operating display.
change-over contact.
signal application.

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

P.O.A.

STEGO Changeover Enclosure Thermostat, 12 → 48 V, -20 → +60 °C

1

Предлагат се на бройка по 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

STEGO Changeover Enclosure Thermostat, 12 → 48 V, -20 → +60 °C
Информацията за складовите наличности временно не е налична.

1

Предлагат се на бройка по 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Технически документи

Спецификации

Brand

STEGO

Switch Configuration

Changeover

Supply Voltage

12 → 48 V

Maximum Temperature

+60 °C

Minimum Temperature

-20 °C

Temperature Range

-20 → +60 °C

Страна на произход

Germany

Детайли за продукта

Stego Electronic Thermostat 12-48Vdc, ETL 011

ETL 011 range of electronic thermostats register the air temperature and can switch signal currents using an internal relay. The ETL 011 can control signal processing devices directly. If the application system requires you to control heating and cooling equipment such as filter fans a switch module is required.The status of the contacts 1-2 is shown via the LED integrated into the adjustment knob.

large setting range.
Small hysteresis.
Optical operating display.
change-over contact.
signal application.