Технически документи
Спецификации
Brand
StecaSolar Panel Voltage
12 V, 24 V
Maximum Power Rating for 12 V Panels
240W
Maximum Current Rating for 12 V Panels
10A
Maximum Power Rating for 24 V Panels
240W
Maximum Current Rating for 24 V Panels
10A
Dimensions
145 x 100 x 30mm
Depth
30mm
Length
145mm
Width
100mm
Страна на произход
Bulgaria
Детайли за продукта
Steca Solsum F
The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers.
The circuit board is completely electronically protected and with the LED user interface it is easy to check the battery state of charge at any time. Large terminals guarantee a simple connection of solar panels, battery and load. The Steca Solsum F works on PWM as a low loss series controller
Voltage regulation
Automatic detection of voltage
PWM control
Multistage charging technology
Current compensated load disconnection
Automatic load reconnection
Temperature compensation
Common positive grounding or negative grounding on one terminal
Monthly maintenance charge
Displays
Multifunction LED display
Multi-coloured LED
4 LEDs show operating states ∼ for operation, state of charge, fault messages
Electronic protection functions
Overcharge protection
Deep discharge protection
Reverse polarity protection of module (≤36 V),load and battery
Automatic electronic fuse
Short circuit protection of load and module
Overvoltage protection at module input
Open circuit protection without battery
Reverse current protection at night
Overtemperature and overload protection
Load disconnection on battery overvoltage
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
StecaSolar Panel Voltage
12 V, 24 V
Maximum Power Rating for 12 V Panels
240W
Maximum Current Rating for 12 V Panels
10A
Maximum Power Rating for 24 V Panels
240W
Maximum Current Rating for 24 V Panels
10A
Dimensions
145 x 100 x 30mm
Depth
30mm
Length
145mm
Width
100mm
Страна на произход
Bulgaria
Детайли за продукта
Steca Solsum F
The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers.
The circuit board is completely electronically protected and with the LED user interface it is easy to check the battery state of charge at any time. Large terminals guarantee a simple connection of solar panels, battery and load. The Steca Solsum F works on PWM as a low loss series controller
Voltage regulation
Automatic detection of voltage
PWM control
Multistage charging technology
Current compensated load disconnection
Automatic load reconnection
Temperature compensation
Common positive grounding or negative grounding on one terminal
Monthly maintenance charge
Displays
Multifunction LED display
Multi-coloured LED
4 LEDs show operating states ∼ for operation, state of charge, fault messages
Electronic protection functions
Overcharge protection
Deep discharge protection
Reverse polarity protection of module (≤36 V),load and battery
Automatic electronic fuse
Short circuit protection of load and module
Overvoltage protection at module input
Open circuit protection without battery
Reverse current protection at night
Overtemperature and overload protection
Load disconnection on battery overvoltage