STAHLWILLE Angle Module, For Use With 730DR/40 Electromechanical torque wrench

Номер на артикул на RS: 127-8043Марка: STAHLWILLE№ по каталога на производителя: 96584628
brand-logo
Преглед на всички в Компоненти и аксесоари за гаечни ключове

Технически документи

Спецификации

Brand

STAHLWILLE

PRICED TO CLEAR

Yes

Страна на произход

Germany

Детайли за продукта

Angle Module For Manoskop® 730DR Electromechanical Torque Wrench

Angle module for use with the Manoskop® 730DR electromechanical torque wrench. Simply attach the module and connect to the torque wrench interface and the torque can be used for angle controlled tightening. The measurements are read off and settings made via the torque wrench. When the preset snug point is reached, the torque wrench automatically switches over to angle-controlled measurement in degrees. Depending on the options selected, the torque wrench can either cut out when the preset angle is reached or an alarm is heard.

Features and Benefits

• Deviation of indication ± 1%
• Settings are made via the torque wrench
• The torque wrench can either cut out when the preset angle is reached or an alarm is heard
• Included 1 x 1.5 V battery

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

P.O.A.

STAHLWILLE Angle Module, For Use With 730DR/40 Electromechanical torque wrench

1

Предлагат се на бройка по 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

STAHLWILLE Angle Module, For Use With 730DR/40 Electromechanical torque wrench
Информацията за складовите наличности временно не е налична.

1

Предлагат се на бройка по 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Технически документи

Спецификации

Brand

STAHLWILLE

PRICED TO CLEAR

Yes

Страна на произход

Germany

Детайли за продукта

Angle Module For Manoskop® 730DR Electromechanical Torque Wrench

Angle module for use with the Manoskop® 730DR electromechanical torque wrench. Simply attach the module and connect to the torque wrench interface and the torque can be used for angle controlled tightening. The measurements are read off and settings made via the torque wrench. When the preset snug point is reached, the torque wrench automatically switches over to angle-controlled measurement in degrees. Depending on the options selected, the torque wrench can either cut out when the preset angle is reached or an alarm is heard.

Features and Benefits

• Deviation of indication ± 1%
• Settings are made via the torque wrench
• The torque wrench can either cut out when the preset angle is reached or an alarm is heard
• Included 1 x 1.5 V battery