SMC Pneumatic Regulator - 0.001MPa to 0.9MPa, 1MPa max. input
Технически документи
Спецификации
Brand
SMCMaximum Outlet Pressure
0.9MPa
Minimum Outlet Pressure
0.001MPa
Maximum Input Pressure
1MPa
Maximum Flow Rate
6L/min
Integral Check Valve
Yes
Minimum Operating Temperature
0°C
Maximum Operating Temperature
+50°C
Overall Dimensions
56 x 15 x 86 (For Single Unit) mm, 56 x 15 x 89 (For Manifold) mm
Overall Width
15mm
Overall Height
86 (For Single Unit) mm, 89 (For Manifold) mm
Overall Length
56mm
Страна на произход
Japan
Детайли за продукта
Compact Series ITV0000
Compact Series ITV0000 Electro-Pneumatic Pressure Regulators work on the principle that when the input signal rises, the air supply solenoid valve turns on. As a result, part of the supply pressure passes through the air supply solenoid valve, and changes to output pressure. This output pressure then feeds back to the control circuit through the pressure sensor. Pressure corrections within the ITV0000 continue until the output pressure becomes proportional to the input signal, enabling output pressure that is proportional to the input signal.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 359,97
Всеки (ex VAT)
1
€ 359,97
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
SMCMaximum Outlet Pressure
0.9MPa
Minimum Outlet Pressure
0.001MPa
Maximum Input Pressure
1MPa
Maximum Flow Rate
6L/min
Integral Check Valve
Yes
Minimum Operating Temperature
0°C
Maximum Operating Temperature
+50°C
Overall Dimensions
56 x 15 x 86 (For Single Unit) mm, 56 x 15 x 89 (For Manifold) mm
Overall Width
15mm
Overall Height
86 (For Single Unit) mm, 89 (For Manifold) mm
Overall Length
56mm
Страна на произход
Japan
Детайли за продукта
Compact Series ITV0000
Compact Series ITV0000 Electro-Pneumatic Pressure Regulators work on the principle that when the input signal rises, the air supply solenoid valve turns on. As a result, part of the supply pressure passes through the air supply solenoid valve, and changes to output pressure. This output pressure then feeds back to the control circuit through the pressure sensor. Pressure corrections within the ITV0000 continue until the output pressure becomes proportional to the input signal, enabling output pressure that is proportional to the input signal.