SKF Hand Bearing Puller, 200.0 cm³ Capacity, 400.0MPa Force
Технически документи
Спецификации
Brand
SKFPuller Type
Bearing Puller
Capacity
200.0 cm³
Hydraulic Force
400.0MPa
Operation
Hand
Страна на произход
Netherlands
Детайли за продукта
SKF Oil Injection Kit - 729101 Series
SKF's oil injection kits provide a safe, efficient and easy way to remove or install bearings on shafts. Suitable for interference fit bearings on both tapered and cylindrical shafts. Oil is injected into oilways machined into the shaft during manufacture. The oil creates a layer between the bearing and shaft that significantly reduces the amount of force required fit or remove the bearing to the shaft. Suitable for use with propellers, rolling bearings, couplings, gears, pulleys and flywheels where the surface pressure is less than 250 N/mm2 (8211251) or 350 N/mm2 (8211255).
Features and Benefits
• 2 m high-pressure hose
• 200 cm3 Oil container capacity
• Pressure Gauge
• G1/4, G1/2 and G3/4 Connection nipples
• Lifespan more than 100.00 cycles
Product Application Information
Can be used with bearings, couplings, railway wheels, flywheels, SKF OK couplings and oil injection applications where maximum pressures of up to 400 MPa are required.
Oil Injection Kits
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
SKFPuller Type
Bearing Puller
Capacity
200.0 cm³
Hydraulic Force
400.0MPa
Operation
Hand
Страна на произход
Netherlands
Детайли за продукта
SKF Oil Injection Kit - 729101 Series
SKF's oil injection kits provide a safe, efficient and easy way to remove or install bearings on shafts. Suitable for interference fit bearings on both tapered and cylindrical shafts. Oil is injected into oilways machined into the shaft during manufacture. The oil creates a layer between the bearing and shaft that significantly reduces the amount of force required fit or remove the bearing to the shaft. Suitable for use with propellers, rolling bearings, couplings, gears, pulleys and flywheels where the surface pressure is less than 250 N/mm2 (8211251) or 350 N/mm2 (8211255).
Features and Benefits
• 2 m high-pressure hose
• 200 cm3 Oil container capacity
• Pressure Gauge
• G1/4, G1/2 and G3/4 Connection nipples
• Lifespan more than 100.00 cycles
Product Application Information
Can be used with bearings, couplings, railway wheels, flywheels, SKF OK couplings and oil injection applications where maximum pressures of up to 400 MPa are required.