Stud Cam Follower KR 16 PP, 6mm ID, 16mm OD
Технически документи
Спецификации
Brand
SKFRoller Diameter
16mm
Roller Length
11mm
Type
Stud
Bore Size
6mm
Static Load Rating
3200N
Dynamic Load Rating
3140N
Ring Slide & Track System Bearing Type
Concentric
Страна на произход
Germany
Детайли за продукта
SKF Stud Type Track Rollers
Cam followers of the KR design are fitted with needle rollers and have a thick outer ring making them suitable for shock loads.
Concentric cam follower
The outer ring is guided via the integral flange at the head of the stud and the pressed on side washer
SKF Cam followers on the PPA design have axial slide rings of polyamide 66
These slide rings reduce the friction and give relatively cool operation that is advantageous for the grease service life
In the radial direction the slide ring forms a narrow gap to the outer ring that protects against course contaminations
Operating temperature range is -30 to +100°C
The PPA design has an improved profile of the runner surface which gives a better stress distribution, also under misaligned conditions
The PPA design has a crowned running surface
Supplied with grease nipples
Lubrication can be done at the Head or thread end, except KR 16 & 19 which can only be lubricated at the head
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 41,01
Всеки (ex VAT)
1
€ 41,01
Всеки (ex VAT)
1
Купете в насипно състояние
| количество | Единична цена |
|---|---|
| 1 - 4 | € 41,01 |
| 5 - 9 | € 39,37 |
| 10 - 24 | € 38,55 |
| 25+ | € 37,72 |
Технически документи
Спецификации
Brand
SKFRoller Diameter
16mm
Roller Length
11mm
Type
Stud
Bore Size
6mm
Static Load Rating
3200N
Dynamic Load Rating
3140N
Ring Slide & Track System Bearing Type
Concentric
Страна на произход
Germany
Детайли за продукта
SKF Stud Type Track Rollers
Cam followers of the KR design are fitted with needle rollers and have a thick outer ring making them suitable for shock loads.
Concentric cam follower
The outer ring is guided via the integral flange at the head of the stud and the pressed on side washer
SKF Cam followers on the PPA design have axial slide rings of polyamide 66
These slide rings reduce the friction and give relatively cool operation that is advantageous for the grease service life
In the radial direction the slide ring forms a narrow gap to the outer ring that protects against course contaminations
Operating temperature range is -30 to +100°C
The PPA design has an improved profile of the runner surface which gives a better stress distribution, also under misaligned conditions
The PPA design has a crowned running surface
Supplied with grease nipples
Lubrication can be done at the Head or thread end, except KR 16 & 19 which can only be lubricated at the head