SKF HK 2210 22mm I.D Needle Roller Bearing, 28mm O.D
Технически документи
Спецификации
Brand
SKFInside Diameter
22mm
Outside Diameter
28mm
Roller Bearing Type
Needle
Race Width
10mm
Bore Type
Parallel
Material
Metal
Static Load Rating
10.6kN
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
7.21kN
End Type
Open
Fatigue Limit Load
1.2kN
Maximum Speed - Oil
12000rpm
Maximum Speed - Grease
8000rpm
Страна на произход
Germany
Детайли за продукта
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required
€ 8,65
€ 8,65 Всеки (ex VAT)
1
€ 8,65
€ 8,65 Всеки (ex VAT)
1
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
| количество | Единична цена |
|---|---|
| 1 - 4 | € 8,65 |
| 5 - 9 | € 8,30 |
| 10 - 24 | € 8,14 |
| 25+ | € 7,98 |
Технически документи
Спецификации
Brand
SKFInside Diameter
22mm
Outside Diameter
28mm
Roller Bearing Type
Needle
Race Width
10mm
Bore Type
Parallel
Material
Metal
Static Load Rating
10.6kN
Cage Material
Sheet Steel
Number of Rows
1
Dynamic Load Rating
7.21kN
End Type
Open
Fatigue Limit Load
1.2kN
Maximum Speed - Oil
12000rpm
Maximum Speed - Grease
8000rpm
Страна на произход
Germany
Детайли за продукта
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Generally used directly on the shaft, which is hardened and ground. Can also be combined with an inner ring for shaft that is not hardened
Used when the housing bore cannot be used as a raceway for a needle roller cage assembly, but where a very compact and economic bearing arrangement is required