Siemens In-line Flow Sensor Fitting for Liquid, 0 m/s Min, 10 m/s Max
Технически документи
Спецификации
Brand
SiemensMedia Monitored
Liquid
Device Type
Flow Sensor
Minimum Flow Rate
0 m/s
Maximum Flow Rate
10 m/s
Pipe Diameter Range
2 in
Connection Type
DN50
Maximum Pressure
16bar
Material
Carbon Steel
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+70°C
Страна на произход
France
Детайли за продукта
MAG 5100W Flowmeter
SITRANS 5100W flow sensors from Siemens have been designed to fulfil the requirements of the water industry. Used in conjunction with the MAG 5000 or 6000 transmitters, they can be used with waste water, ground water, drinking water, filtration, irrigation, water treatment and many other water based applications.The flow sensor uses the principles of electromagnetic conduction. Fluid flowing through the sensors magnetic coils induce a voltage that is proportional to the flow rate of the liquid.
IP67/ NEMEA enclosure
NBR hard rubber liner
Low-flow measurement for leak detection
Suitable for burying and constant flooding
No need for grounding straps or grounding rings
Build-in length complies with ISO 1335
SENSOREPROM automatically updates settings on commissioning
Complies with EN 1092, DIN and ANSI flange standards
Hastelloy C electrodes
Corrosion resistant stainless steel sensor housing
Easy to install into existing pipework systems
Compact or remote mountable
Approvals
WRAS, DVGW W270, ACS, MCERTS
Siemens SITRANS Flow Sensors
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
SiemensMedia Monitored
Liquid
Device Type
Flow Sensor
Minimum Flow Rate
0 m/s
Maximum Flow Rate
10 m/s
Pipe Diameter Range
2 in
Connection Type
DN50
Maximum Pressure
16bar
Material
Carbon Steel
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+70°C
Страна на произход
France
Детайли за продукта
MAG 5100W Flowmeter
SITRANS 5100W flow sensors from Siemens have been designed to fulfil the requirements of the water industry. Used in conjunction with the MAG 5000 or 6000 transmitters, they can be used with waste water, ground water, drinking water, filtration, irrigation, water treatment and many other water based applications.The flow sensor uses the principles of electromagnetic conduction. Fluid flowing through the sensors magnetic coils induce a voltage that is proportional to the flow rate of the liquid.
IP67/ NEMEA enclosure
NBR hard rubber liner
Low-flow measurement for leak detection
Suitable for burying and constant flooding
No need for grounding straps or grounding rings
Build-in length complies with ISO 1335
SENSOREPROM automatically updates settings on commissioning
Complies with EN 1092, DIN and ANSI flange standards
Hastelloy C electrodes
Corrosion resistant stainless steel sensor housing
Easy to install into existing pipework systems
Compact or remote mountable
Approvals
WRAS, DVGW W270, ACS, MCERTS