Sensata Cynergy3 SSF67 Series Vertical Stainless Steel Float Switch, Float, 1m Cable, NO/NC
Технически документи
Спецификации
Brand
Sensata / Cynergy3Device Type
Float
Mounting Type
Vertical
Switch Output
NO/NC
Body Material
Stainless Steel
Cable Length
1m
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+135°C
Maximum Current
600 mA
Maximum Pressure
10bar
Gasket Material
Nitrile
Series
SSF67
Страна на произход
Taiwan, Province Of China
Детайли за продукта
Dual Position Stainless Steel Float Switch
Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications.
Two Independent Switching Points
Lower Float Make on Fall, and Upper Float Make on Rise
Minimum Fluid SG: 0.80
Switch Differential (each level) Nominal: 1mm
Suitable for High and Low Level Alarm and Control Signal
Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications
Vertical Mounting, M16 x 2 Thread
Temperature Range: -20 to +135°C
Nitrile Gasket
’Safe Area’ for Use in Petrochemical, Storage, and Process Control Applications
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 301,70
Всеки (ex VAT)
1
€ 301,70
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
Sensata / Cynergy3Device Type
Float
Mounting Type
Vertical
Switch Output
NO/NC
Body Material
Stainless Steel
Cable Length
1m
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+135°C
Maximum Current
600 mA
Maximum Pressure
10bar
Gasket Material
Nitrile
Series
SSF67
Страна на произход
Taiwan, Province Of China
Детайли за продукта
Dual Position Stainless Steel Float Switch
Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications.
Two Independent Switching Points
Lower Float Make on Fall, and Upper Float Make on Rise
Minimum Fluid SG: 0.80
Switch Differential (each level) Nominal: 1mm
Suitable for High and Low Level Alarm and Control Signal
Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications
Vertical Mounting, M16 x 2 Thread
Temperature Range: -20 to +135°C
Nitrile Gasket
’Safe Area’ for Use in Petrochemical, Storage, and Process Control Applications
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.