Sensata Cynergy3 FS Series Flow Controller, 3.75 L/min, Relay Output, 240 V, 22 mm Pipe
Технически документи
Спецификации
Brand
Sensata / Cynergy3Maximum Flow Rate
3.75 L/min
Electrical Connection
Cable
Control Output
Relay
Supply Voltage
240 V
Display Screen
No
Pipe Diameter Range
22 mm
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+85°C
Series
FS
Current Rating
600 mA
Страна на произход
United Kingdom
Детайли за продукта
Normally Open Flow Switch
Flow switch series from Cynergy3. These flow switches are reed switch based and can monitor the flow of liquids up to 10bar in pressure. This series of flow switches can be mounted horizontally or vertically and have minimal flow restriction. Flow switches are ideally used in water but can be used in weak acidic liquids.
Mainly for use with hot or cold water, however they may also be used with a wide range of chemicals
Pressure rating 150psi maximum
Switching current 1A dc or ac (rms)
Switching voltage 240V dc or ac (rms)
Switching power 15W (15VA) resistive loads
Operating temperature 85°C maximum
Vertical or horizontal mounting
Standard compression or push fit fittings
WRAS approved for use in cold water
Complete with a 250mm lead
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
€ 30,30
Всеки (ex VAT)
1
€ 30,30
Всеки (ex VAT)
1
Технически документи
Спецификации
Brand
Sensata / Cynergy3Maximum Flow Rate
3.75 L/min
Electrical Connection
Cable
Control Output
Relay
Supply Voltage
240 V
Display Screen
No
Pipe Diameter Range
22 mm
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+85°C
Series
FS
Current Rating
600 mA
Страна на произход
United Kingdom
Детайли за продукта
Normally Open Flow Switch
Flow switch series from Cynergy3. These flow switches are reed switch based and can monitor the flow of liquids up to 10bar in pressure. This series of flow switches can be mounted horizontally or vertically and have minimal flow restriction. Flow switches are ideally used in water but can be used in weak acidic liquids.
Mainly for use with hot or cold water, however they may also be used with a wide range of chemicals
Pressure rating 150psi maximum
Switching current 1A dc or ac (rms)
Switching voltage 240V dc or ac (rms)
Switching power 15W (15VA) resistive loads
Operating temperature 85°C maximum
Vertical or horizontal mounting
Standard compression or push fit fittings
WRAS approved for use in cold water
Complete with a 250mm lead