SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

Номер на артикул на RS: 131-1336Марка: SEGGER№ по каталога на производителя: 8.07.01 SWD Isolator
brand-logo
Преглед на всички в Аксесоари за инструменти за разработка

Технически документи

Спецификации

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Детайли за продукта

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

€ 274,28

Всеки (ex VAT)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

1

Предлагат се на бройка по 1
1€ 274,28
2€ 548,57
3€ 822,85
4€ 1 097,13
5€ 1 371,41
6€ 1 645,70
7€ 1 919,98
8€ 2 194,26
9€ 2 468,55
10€ 2 742,83
11€ 3 017,11
12€ 3 291,39
13€ 3 565,68
14€ 3 839,96
15€ 4 114,24

€ 274,28

Всеки (ex VAT)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes
Информацията за складовите наличности временно не е налична.

1

Предлагат се на бройка по 1
1€ 274,28
2€ 548,57
3€ 822,85
4€ 1 097,13
5€ 1 371,41
6€ 1 645,70
7€ 1 919,98
8€ 2 194,26
9€ 2 468,55
10€ 2 742,83
11€ 3 017,11
12€ 3 291,39
13€ 3 565,68
14€ 3 839,96
15€ 4 114,24

Технически документи

Спецификации

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Детайли за продукта

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET