SEGGER J-Link ARM JTAG Isolator Board

Номер на артикул на RS: 131-1335Марка: SEGGER№ по каталога на производителя: 8.07.00 JTAG Isolator
brand-logo
Преглед на всички в Програми за отстраняване на грешки и емулатори във

Технически документи

Спецификации

Brand

SEGGER

Kit Name

J-Link ARM JTAG Isolator Board

For Use With

J-Link Probes

Product Type

Programmer

Детайли за продукта

J-Link ARM JTAG Isolator Board

The J-Link JTAG Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
• Power consumption on target side: 35mA typical
• JTAG frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET

Информацията за складовите наличности временно не е налична.

Моля, проверете отново по-късно.

Информацията за складовите наличности временно не е налична.

€ 270,66

Всеки (ex VAT)

SEGGER J-Link ARM JTAG Isolator Board

1

Предлагат се на бройка по 1
1€ 270,66
2€ 541,32
3€ 811,98
4€ 1 082,65
5€ 1 353,31
6€ 1 623,97
7€ 1 894,63
8€ 2 165,29
9€ 2 435,95
10€ 2 706,62
11€ 2 977,28
12€ 3 247,94
13€ 3 518,60
14€ 3 789,26
15€ 4 059,92

€ 270,66

Всеки (ex VAT)

SEGGER J-Link ARM JTAG Isolator Board
Информацията за складовите наличности временно не е налична.

1

Предлагат се на бройка по 1
1€ 270,66
2€ 541,32
3€ 811,98
4€ 1 082,65
5€ 1 353,31
6€ 1 623,97
7€ 1 894,63
8€ 2 165,29
9€ 2 435,95
10€ 2 706,62
11€ 2 977,28
12€ 3 247,94
13€ 3 518,60
14€ 3 789,26
15€ 4 059,92

Технически документи

Спецификации

Brand

SEGGER

Kit Name

J-Link ARM JTAG Isolator Board

For Use With

J-Link Probes

Product Type

Programmer

Детайли за продукта

J-Link ARM JTAG Isolator Board

The J-Link JTAG Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
• Power consumption on target side: 35mA typical
• JTAG frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET