Schneider Electric Linear DIN Rail Power Supply, 207 → 253V ac ac Input, 24V dc dc Output, 6A Output, 144W
Технически документи
Спецификации
Brand
Schneider ElectricType
Linear
Electrical Phase
1, 2
AC or DC Input Voltage
ac
Number of Outputs
1
Input Voltage
207 → 253V ac
AC or DC Output Voltage
dc
Output Voltage
24V dc
Output Current
6A
Power Rating
144W
Height
153mm
Depth
153mm
Mounting Type
DIN Rail Mount
Minimum Temperature
-20°C
Ripple And Noise
1200mV
Maximum Temperature
+60°C
Страна на произход
Czech Republic
Детайли за продукта
ABL 8FEQ filtered, rectified power supplies
Filtered, rectified power supplies are built using a security transformer equipped with a bridge rectifier and filter capacitors.
With no regulation, rectified power supplies provide a non-regulated voltage sensitive to variations in line supply and load. They can only be used on good quality line supplies where fluctuations are limited to -10 %… + 10 % of the nominal value.
These supplies are connected between phase and neutral or between two phases, filtered and rectified. They are designed for direct mounting on a DIN rail.
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
P.O.A.
1
P.O.A.
1
Технически документи
Спецификации
Brand
Schneider ElectricType
Linear
Electrical Phase
1, 2
AC or DC Input Voltage
ac
Number of Outputs
1
Input Voltage
207 → 253V ac
AC or DC Output Voltage
dc
Output Voltage
24V dc
Output Current
6A
Power Rating
144W
Height
153mm
Depth
153mm
Mounting Type
DIN Rail Mount
Minimum Temperature
-20°C
Ripple And Noise
1200mV
Maximum Temperature
+60°C
Страна на произход
Czech Republic
Детайли за продукта
ABL 8FEQ filtered, rectified power supplies
Filtered, rectified power supplies are built using a security transformer equipped with a bridge rectifier and filter capacitors.
With no regulation, rectified power supplies provide a non-regulated voltage sensitive to variations in line supply and load. They can only be used on good quality line supplies where fluctuations are limited to -10 %… + 10 % of the nominal value.
These supplies are connected between phase and neutral or between two phases, filtered and rectified. They are designed for direct mounting on a DIN rail.