Schneider Electric Auxiliary Contact, 2 Contact, 2NO, DIN Rail Mount, Acti 9 iACT
Технически документи
Спецификации
Brand
Schneider ElectricNumber of Contacts
2
Normal State Configuration
2NO
Mounting Style
DIN Rail Mount
Range
Acti 9
Series
iACT
Contact Current Rating
2 A
Terminal Type
Screw
Pole and Throw Configuration
DP
Contact Voltage Rating
24 → 130 V dc, 24 → 240 V ac
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+50°C
Страна на произход
France
Детайли за продукта
Acti9 iACT Auxiliary Contactors
Acti9 iACT Auxiliary Contactors are suitable for iCT contactors, these auxiliaries allow different operations
iACTs allows indication or control of the "open"or "closed" position of the contactor power contacts
iACTp is an interference suppressor which limits overvoltages on the control circuit
iACTc is used to control a contactor in impulse-type mode or to combine latched or impulse-type control orders
iACT24 allows control and indication of a 230 Vac contactor from the Acti 9 Smartlink or by a PLC, by 24 V DC signals
iATEt is used to time delay for iCT and iTL
€ 75,16
€ 75,16 Всеки (ex VAT)
1
€ 75,16
€ 75,16 Всеки (ex VAT)
1
Информацията за складовите наличности временно не е налична.
Моля, проверете отново по-късно.
Технически документи
Спецификации
Brand
Schneider ElectricNumber of Contacts
2
Normal State Configuration
2NO
Mounting Style
DIN Rail Mount
Range
Acti 9
Series
iACT
Contact Current Rating
2 A
Terminal Type
Screw
Pole and Throw Configuration
DP
Contact Voltage Rating
24 → 130 V dc, 24 → 240 V ac
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+50°C
Страна на произход
France
Детайли за продукта
Acti9 iACT Auxiliary Contactors
Acti9 iACT Auxiliary Contactors are suitable for iCT contactors, these auxiliaries allow different operations
iACTs allows indication or control of the "open"or "closed" position of the contactor power contacts
iACTp is an interference suppressor which limits overvoltages on the control circuit
iACTc is used to control a contactor in impulse-type mode or to combine latched or impulse-type control orders
iACT24 allows control and indication of a 230 Vac contactor from the Acti 9 Smartlink or by a PLC, by 24 V DC signals
iATEt is used to time delay for iCT and iTL